×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 18214 | HVAC Heater Hose
click to zoom in

Gates 18214 | HVAC Heater Hose

(No reviews yet) Write a Review
$17.99
Part Number
GAT18214
UPC:
72053191509
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Premium Molded Heater Hose
  • Premium Molded Heater Hose
  • 1999-1995 Nissan, Sentra, 4-Cyl. 1.6 L, Pipe-1 To Intake Manifold
  • Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)17
Centerline Length (mm)432
End 1 Inside Diameter.31
End 1 Inside Diameter8
End 2 Inside Diameter.31
End 2 Inside Diameter8
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • General Motors: 96068621
  • Carquest: 18214
  • Volkswagen: 1J0122447BR
  • Honda: 19513P13A00
  • General Motors: 96068622
  • Suzuki: 1349158B00
  • Mazda: B67K13691
  • Datsun/Nissan: 1408084A00
  • ACDelco: 16012M
  • NAPA Belts/Hose: 10214
  • Datsun/Nissan: 140561M204
  • Suzuki: 1349258B00

APPLICATIONS:

  • 1995-1997 Pontiac Sunrunner - Position: Throttle Body To Thermostat
    • Cut to fit
  • 1999-2001 Volkswagen Golf - Position: Tee-2 To Tee-1
    • Cut to fit
  • 1997-2001 Honda Prelude - Position: Thermostat To Valve-2
    • Cut to fit
  • 1999-1999 Nissan Tsubame - Position: Pipe-1 To Intake Manifold
    • Cut to fit
  • 1996-1996 Suzuki Sidekick - Position: Water Pump Pipe To Throttle Body
    • Cut to fit
  • 1990-1990 Nissan Sentra - Position: Throttle Body To Pipe
  • 1990-1990 Nissan Pulsar NX - Position: Throttle Body To Pipe
  • 2003-2003 Nissan Tsubame - Position: Pipe-1 To Intake Manifold
    • Cut to fit
  • 1997-1998 Suzuki Sidekick - Position: Water Pump To Throttle Body
    • Cut to fit
  • 1995-1995 Geo Tracker - Position: Throttle Body To Pipe-1
    • W/Calif. Emission System; Cut to fit
  • 1994-1995 Suzuki Sidekick - Position: Water Pump Pipe To Throttle Body
    • W/16-Valve Eng.; Cut to fit
  • 1995-1997 Geo Tracker - Position: Throttle Body To Thermostat
    • Cut to fit
  • 1996-1996 Suzuki X-90 - Position: Water Pump Pipe To Throttle Body
    • Cut to fit
  • 1994-1994 Geo Tracker - Position: Throttle Body To Injector
  • 1992-1993 Suzuki Sidekick - Position: Throttle Body To Thermostat
    • W/16-Valve Eng.; Cut to fit
  • 1999-2001 Volkswagen Jetta - Position: Tee-2 To Tee-1
    • Cut to fit
  • 1995-1998 Nissan 200SX - Position: Pipe-1 To Intake Manifold
    • Cut to fit
  • 1994-1994 Geo Tracker - Position: Throttle Body To Pipe
    • W/Calif. Emission System; Cut to fit
  • 1995-1995 Geo Tracker - Position: Pipe To Throttle Body
  • 1992-1993 Mazda MX-3 - Position: Valve To Intake Manifold
    • Cut to fit
  • 1998-1998 Chevrolet Tracker - Position: Throttle Body To Thermostat
    • Cut to fit
  • 1995-1999 Nissan Tsuru - Position: Pipe-1 To Intake Manifold
    • Cut to fit
  • 1997-1998 Suzuki X-90 - Position: Water Pump To Throttle Body
    • Cut to fit
  • 1995-1999 Nissan Sentra - Position: Pipe-1 To Intake Manifold
    • Cut to fit
  • 1995-1996 Nissan Tsubame - Position: Pipe-1 To Intake Manifold
    • Cut to fit
  • 1990-1990 Nissan Tsuru - Position: Throttle Body To Pipe

Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
17
Centerline Length (Millimeter):
432
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.31
End 1 Inside Diameter (Millimeter):
8
End 2 Inside Diameter (Inch):
.31
End 2 Inside Diameter (Millimeter):
8
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.2100
Weight - Case (Gross Pounds):
5.7480
Height - Each (Inch):
0.6200
Height - Case (Inch):
7.8750
Length - Each (Inch):
10.8750
Life Cycle Status Description:
Available Only While Supplies Last
Length - Case (Inch):
10.8750
Item Level GTIN:
00072053191509
Width - Each (Inch):
8.8750
Quantity Per Application:
1
Width - Case (Inch):
8.8750



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top