click to zoom in
Gates 18227 | HVAC Heater Hose
5 customers are viewing this product
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4” to 1”.
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- 2007-06 Subaru, B9 Tribeca, 6-Cyl. 3.0 L, Pipe-1 To Throttle Body
- Premium Molded Heater Hose
- Molded Heater Hose
- Premium Molded Heater Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length (in) | 12.3 |
| Centerline Length (mm) | 312 |
| End 1 Inside Diameter | .31 |
| End 1 Inside Diameter | 8 |
| End 2 Inside Diameter | .31 |
| End 2 Inside Diameter | 8 |
| Material | EPDM |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Honda: 19507P12A00
- Goodyear: 64157
- Datsun/Nissan: 140563S501
- ACDelco: 14034S
- NAPA Belts/Hose: 10227
- Carquest: 18227
APPLICATIONS:
- 2006-2007 Subaru B9 Tribeca - Position: Pipe-1 To Throttle Body
- 1997-1999 Acura CL - Position: Throttle Body To Valve-2
- 2008-2010 Subaru Tribeca - Position: Pipe-1 To Throttle Body
- 1992-1996 Honda Prelude - Position: Valve-3 To Engine
1-year Replacement unlimited-mileage warranty
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
12.3
Centerline Length (Millimeter):
312
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.31
End 1 Inside Diameter (Millimeter):
8
End 2 Inside Diameter (Inch):
.31
End 2 Inside Diameter (Millimeter):
8
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
9.9000
Weight - Case (Gross Pounds):
247.9980
Height - Each (Inch):
0.6200
Height - Case (Inch):
7.8750
Length - Each (Inch):
9.8400
Life Cycle Status Description:
Available Only While Supplies Last
Length - Case (Inch):
10.8750
Item Level GTIN:
00072053412062
Width - Each (Inch):
3.6900
Quantity Per Application:
1
Width - Case (Inch):
8.8750