×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 18253 | HVAC Heater Hose
click to zoom in

Gates 18253 | HVAC Heater Hose

(No reviews yet) Write a Review
$8.99
Part Number
GAT18253
UPC:
72053466133
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Molded Heater Hose
  • Premium Molded Heater Hose
  • 2012-07 Hyundai, Elantra, 4-Cyl. 2.0 L, Throttle Body To Thermostat
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)7.3
Centerline Length (mm)185
End 1 Inside Diameter.29
End 1 Inside Diameter7
End 2 Inside Diameter7
End 2 Inside Diameter.29
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

Cut to fit

DOWNLOADS:

INTERCHANGE:

  • ACDelco: 14312S
  • Carquest: 18253
  • General Motors: 91174452
  • Saturn: 9128070
  • Subaru (cars): 21204AB290
  • Mitsubishi: MD316247
  • NAPA Belts/Hose: 10253
  • Hyundai: 2546823550
  • Suzuki: 1349152G01
  • Goodyear: 64225
  • Subaru (cars): 99078AA280

APPLICATIONS:

  • 2011-2014 Subaru Tribeca - Position: Throttle Body Outlet
  • 1999-2001 Suzuki Esteem - Position: Pipe-1 To Throttle Body
  • 1999-2000 Pontiac Firefly - Position: Throttle Body To Engine
  • 2014-2018 Subaru Forester - Position: Throttle Body Inlet
  • 2008-2008 Subaru Legacy - Position: Throttle Body To Pipe-2
  • 2000-2000 Saturn LW2 - Position: Pipe-1 To Intake Manifold
  • 2007-2012 Hyundai Elantra - Position: Throttle Body To Thermostat
  • 2010-2018 Subaru Legacy - Position: Throttle Body Outlet
  • 2006-2007 Subaru B9 Tribeca - Position: Throttle Body To Pipe-2
  • 2010-2017 Subaru Outback - Position: Throttle Body Outlet
  • 1999-2001 Suzuki Swift - Position: Throttle Body To Engine
  • 2001-2003 Saturn LW300 - Position: Pipe-1 To Intake Manifold
  • 1999-2001 Chevrolet Metro - Position: Throttle Body To Engine
  • 2001-2005 Saturn L300 - Position: Pipe-1 To Intake Manifold
  • 2000-2000 Saturn LS2 - Position: Pipe-1 To Intake Manifold
  • 2008-2010 Subaru Tribeca - Position: Throttle Body To Pipe-2
  • 2005-2009 Subaru Outback - Position: Throttle Body To Pipe-2
  • 1997-2002 Mitsubishi Mirage - Position: Throttle Body Outlet
  • 2015-2015 Subaru WRX - Position: Throttle Body Inlet

Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
7.3
Centerline Length (Millimeter):
185
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.29
End 1 Inside Diameter (Millimeter):
7
End 2 Inside Diameter (Inch):
.29
End 2 Inside Diameter (Millimeter):
7
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.0700
Weight - Case (Gross Pounds):
3.9980
Height - Each (Inch):
0.5800
Height - Case (Inch):
7.8750
Length - Each (Inch):
5.8400
Life Cycle Status Description:
Available Only While Supplies Last
Length - Case (Inch):
10.8750
Item Level GTIN:
00072053466133
Width - Each (Inch):
2.1900
Quantity Per Application:
2
Width - Case (Inch):
8.8750



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top