×
close
click to zoom in

Gates 18320 | HVAC Heater Hose

(No reviews yet) Write a Review
$10.99
Part Number
GAT18320
UPC:
72053472509
Condition:
New
5 customers are viewing this product

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • 2011-06 Cadillac, DTS, V-8 4.6 L, Pipe-3 To Reservoir
  • Molded Heater Hose
  • Premium Molded Heater Hose
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)6
Centerline Length (mm)152
End 1 Inside Diameter9
End 1 Inside Diameter.37
End 2 Inside Diameter9
End 2 Inside Diameter.37
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

Cut to fit

DOWNLOADS:

INTERCHANGE:

  • NAPA Belts/Hose: 10320
  • General Motors: 21999651
  • General Motors: 25760637
  • Carquest: 18320
  • ACDelco: 14330S
  • Goodyear: 64414
  • Isuzu: 8971362180

APPLICATIONS:

  • 1998-2002 Honda Passport - Position: Pipe-3 To Throttle Body
  • 2001-2003 Isuzu Rodeo Sport - Position: Pipe-3 To Throttle Body
  • 2006-2011 Buick Lucerne - Position: Pipe-3 To Reservoir
  • 1998-2000 Isuzu Amigo - Position: Pipe-3 To Throttle Body
  • 2012-2013 Buick LaCrosse - Position: Tee To Separator
  • 1998-2004 Isuzu Rodeo - Position: Pipe-3 To Throttle Body
  • 2012-2013 Buick Regal - Position: Tee To Separator
  • 2002-2004 Isuzu Axiom - Position: Pipe-3 To Throttle Body
  • 2013-2013 Chevrolet Malibu - Position: Tee To Separator
  • 2006-2011 Cadillac DTS - Position: Pipe-3 To Reservoir

1-year Replacement unlimited-mileage warranty
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
6.2
Centerline Length (Millimeter):
157
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.37
End 1 Inside Diameter (Millimeter):
9
End 2 Inside Diameter (Inch):
.37
End 2 Inside Diameter (Millimeter):
9
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.0800
Height - Each (Inch):
0.7400
Length - Each (Inch):
4.9600
Width - Each (Inch):
1.8600
Life Cycle Status Description:
Available Only While Supplies Last
Item Level GTIN:
00072053472509
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top