×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 18707 | HVAC Heater Hose
click to zoom in

Gates 18707 | HVAC Heater Hose

(No reviews yet) Write a Review
$21.00
Part Number
GAT18707
UPC:
72053178852
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • 2009-07 Suzuki, XL-7, V-6 3.6 L, Tee To Reservoir
  • Molded Heater Hose
  • Premium Molded Heater Hose
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)21.4
Centerline Length (mm)544
End 1 Inside Diameter16
End 1 Inside Diameter.62
End 2 Inside Diameter19
End 2 Inside Diameter.75
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • ACDelco: 18024L
  • NAPA Belts/Hose: 10707
  • Ford: E8OY 18472 A
  • Ford: E90H 18D334 AA
  • Goodyear: 4317
  • Goodyear: 63051
  • Carquest: 18707

APPLICATIONS:

  • 1988-1989 Ford Taurus - Position: Heater To Engine
    • W/A.C.; W/O Auto. Temp. Control
  • 2007-2009 Suzuki XL-7 - Position: Tee-1 To Reservoir
    • W/Rear A.C.; Cut to fit
  • 1988-1989 Lincoln Continental - Position: Heater To Valve
  • 2007-2009 Suzuki XL-7 - Position: Tee To Reservoir
  • 1988-1989 Mercury Sable - Position: Heater To Engine
    • W/A.C.; W/O Auto. Temp. Control

Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
21.4
Centerline Length (Millimeter):
544
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.62
End 1 Inside Diameter (Millimeter):
16
End 2 Inside Diameter (Inch):
.75
End 2 Inside Diameter (Millimeter):
19
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.5000
Weight - Case (Gross Pounds):
42.6410
Height - Each (Inch):
1.2400
Height - Case (Inch):
19.3750
Length - Each (Inch):
17.1200
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Length - Case (Inch):
26.3750
Item Level GTIN:
00072053178852
Width - Each (Inch):
6.4200
Quantity Per Application:
1
Width - Case (Inch):
12.3750



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top