×
close
click to zoom in

Gates 18716 | HVAC Heater Hose

(No reviews yet) Write a Review
$28.89
Part Number
GAT18716
UPC:
72053179781
Condition:
New
5 customers are viewing this product

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Premium Molded Heater Hose
  • Molded Heater Hose
  • 1990-1989 Toyota, Tercel, 4-Cyl. 1.5 L, Heater To Eng.
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)17.5
Centerline Length (mm)445
End 1 Inside Diameter.62
End 1 Inside Diameter16
End 2 Inside Diameter.62
End 2 Inside Diameter16
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

Cut to fit

INTERCHANGE:

  • Goodyear: 63230
  • Hyundai: 9731222100
  • NAPA Belts/Hose: 10716
  • ACDelco: 16035M
  • Toyota: 8724516270
  • Carquest: 18716

APPLICATIONS:

  • 1989-1990 Toyota Tercel - Position: Heater To Engine
  • 1996-1997 Hyundai Accent - Position: Heater To Pipe-2

Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
17.5
Centerline Length (Millimeter):
445
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.62
End 1 Inside Diameter (Millimeter):
16
End 2 Inside Diameter (Inch):
.62
End 2 Inside Diameter (Millimeter):
16
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.3400
Weight - Case (Gross Pounds):
9.5940
Height - Each (Inch):
1.2400
Height - Case (Inch):
7.8750
Length - Each (Inch):
14.0000
Life Cycle Status Description:
Available Only While Supplies Last
Length - Case (Inch):
18.1250
Item Level GTIN:
00072053179781
Width - Each (Inch):
5.2500
Quantity Per Application:
1
Width - Case (Inch):
14.6250



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top