×
close
click to zoom in

Gates 18779 | HVAC Heater Hose

(No reviews yet) Write a Review
$12.99
Part Number
GAT18779
UPC:
72053179248
Condition:
New
5 customers are viewing this product

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Premium Molded Heater Hose
  • Molded Heater Hose
  • 1994-1990 Mazda, Protege, 4-Cyl. 1.8 L, Heater To Pipe-2
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)14.1
Centerline Length (mm)358
End 1 Inside Diameter.62
End 1 Inside Diameter16
End 2 Inside Diameter16
End 2 Inside Diameter.62
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

Cut to fit

DOWNLOADS:

INTERCHANGE:

  • Carquest: 18779
  • ACDelco: 16053M
  • Goodyear: 63187
  • Mazda: EA7661212
  • Ford: F1CZ 18472 A
  • Subaru (cars): 807615132
  • Mazda: BR706124YA
  • Chrysler: 4592104
  • NAPA Belts/Hose: 10779
  • Mazda: BR706124Y
  • Dayco: 87655
  • Dayco: C87655

APPLICATIONS:

  • 1993-1997 Eagle Vision - Position: Tee-2 To Reservoir
  • 1990-1995 Mazda 323 - Position: Heater To Pipe-2
  • 1990-1994 Mazda Protege - Position: Heater To Pipe-2
  • 1991-1996 Mercury Tracer - Position: Heater To Engine
  • 1988-1991 Subaru XT - Position: Pipe-1 To Water Pump
  • 1992-1996 Mazda MX-3 - Position: Heater To Pipe-2
  • 1991-1996 Ford Escort - Position: Heater To Engine

1-year Replacement unlimited-mileage warranty
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
14.1
Centerline Length (Millimeter):
358
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.62
End 1 Inside Diameter (Millimeter):
16
End 2 Inside Diameter (Inch):
.62
End 2 Inside Diameter (Millimeter):
16
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.4400
Weight - Case (Gross Pounds):
23.2670
Height - Each (Inch):
1.2400
Height - Case (Inch):
9.8750
Length - Each (Inch):
11.2800
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Length - Case (Inch):
22.0000
Item Level GTIN:
00072053179248
Width - Each (Inch):
4.2300
Quantity Per Application:
1
Width - Case (Inch):
12.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top