click to zoom in
Gates 18786 | HVAC Heater Hose
5 customers are viewing this product
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4” to 1”.
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Molded Heater Hose
- 2011-06 Chevrolet, Impala, V-6 3.5 L, Pipe-4 To Heater
- Premium Molded Heater Hose
- Premium Molded Heater Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length (in) | 17.7 |
| Centerline Length (mm) | 450 |
| End 1 Inside Diameter | .62 |
| End 1 Inside Diameter | 16 |
| End 2 Inside Diameter | 16 |
| End 2 Inside Diameter | .62 |
| Material | EPDM |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Kia: 0K24D61212
- Kia: 0K24D61212A
- Carquest: 18786
- General Motors: 15821186
- Goodyear: 63300
- Mitsubishi: AW342621
- ACDelco: 16059M
- General Motors: 15893669
- Ford: E8UZ 18472 A
- General Motors: 14034308
- General Motors: 15286611
- NAPA Belts/Hose: 10786
- Ford: F0UZ 18472 A
APPLICATIONS:
- 1997-1998 Mitsubishi Diamante - Position: Heater Inlet
- 1992-1996 Ford E-250 Econoline - Position: Tee To Thermostat
- W/Aux. Heater
- 1990-1991 Ford E-350 Econoline - Position: Heater To Engine
- W/O Aux. Heater
- 1992-1996 Ford E-150 Econoline - Position: Tee To Thermostat
- W/Aux. Heater
- 2006-2011 Chevrolet Impala - Position: Pipe-4 To Heater
- 1992-1996 Ford E-350 Econoline Club Wagon - Position: Tee To Thermostat
- W/Aux. Heater
- 1992-1996 Ford E-350 Econoline - Position: Tee To Thermostat
- W/Aux. Heater
- 1990-1991 Ford E-350 Econoline Club Wagon - Position: Heater To Engine
- W/O Aux. Heater
- 1990-1991 Ford E-250 Econoline Club Wagon - Position: Heater To Engine
- W/O Aux. Heater
- 1992-1996 Ford E-150 Econoline Club Wagon - Position: Tee To Thermostat
- W/Aux. Heater
- 2006-2007 Chevrolet Monte Carlo - Position: Pipe-4 To Heater
- 1982-1986 Pontiac Acadian - Position: Heater To Pipe-2
- Hose is inside vehicle under dashboard.; Cut to fit
- 1992-1996 Ford E-250 Econoline - Position: Tee-3 To Thermostat
- W/Aux. Heater; W/A.C.; Cut to fit
- 1999-2000 Mitsubishi Diamante - Position: Heater Inlet
- W/Fed. Emissions
- 1990-1991 Ford E-250 Econoline - Position: Heater To Engine
- W/O Aux. Heater
- 1992-1996 Ford E-150 Econoline Club Wagon - Position: Tee-3 To Thermostat
- W/Aux. Heater; W/A.C.; Cut to fit
- 1995-1997 Kia Sephia - Position: Heater To Pipe-1
- 1990-1991 Ford E-150 Econoline Club Wagon - Position: Heater To Engine
- W/O Aux. Heater
- 1992-1996 Ford E-150 Econoline - Position: Tee-3 To Thermostat
- W/Aux. Heater; W/A.C.; Cut to fit
- 1992-1996 Ford E-350 Econoline Club Wagon - Position: Tee-3 To Thermostat
- W/Aux. Heater; W/A.C.; Cut to fit
- 1982-1986 Chevrolet Chevette - Position: Heater To Pipe-2
- Hose is inside vehicle under dashboard.; Cut to fit
- 1995-1995 Ford Club Wagon - Position: Tee-3 To Thermostat
- W/Aux. Heater; W/A.C.; Cut to fit
- 1990-1991 Ford E-150 Econoline - Position: Heater To Engine
- W/O Aux. Heater
- 1992-1996 Ford E-350 Econoline - Position: Tee-3 To Thermostat
- W/Aux. Heater; W/A.C.; Cut to fit
1-year Replacement unlimited-mileage warranty
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
17.7
Centerline Length (Millimeter):
450
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.62
End 1 Inside Diameter (Millimeter):
16
End 2 Inside Diameter (Inch):
.62
End 2 Inside Diameter (Millimeter):
16
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.4200
Weight - Case (Gross Pounds):
22.7660
Height - Each (Inch):
1.2400
Height - Case (Inch):
7.8750
Length - Each (Inch):
14.1600
Life Cycle Status Description:
Available Only While Supplies Last
Length - Case (Inch):
22.1250
Item Level GTIN:
00072053179316
Width - Each (Inch):
5.3100
Quantity Per Application:
1
Width - Case (Inch):
18.1250