×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 18798 | HVAC Heater Hose
click to zoom in

Gates 18798 | HVAC Heater Hose

(No reviews yet) Write a Review
$11.99
Part Number
GAT18798
UPC:
72053179422
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Premium Molded Heater Hose
  • Premium Molded Heater Hose
  • 2017-10 Toyota, Prius, 4-Cyl. 1.8 L Electric Assist, Pipe-5 To Pipe-6
  • Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)10.2
Centerline Length (mm)259
End 1 Inside Diameter16
End 1 Inside Diameter.62
End 2 Inside Diameter16
End 2 Inside Diameter.62
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • Mazda: 887161213
  • Ford: E9SZ 8548 A
  • Toyota: 8724608030
  • Goodyear: 4382
  • NAPA Belts/Hose: 10798
  • Ford: F4FZ 8A582 BA
  • Goodyear: 63045
  • Motorcraft: KM-1747
  • Dayco: B71575
  • Toyota: 8724547280
  • Goodyear: 64132
  • Ford: F1SE 8597 CA
  • Ford: 1L2Z 18472 PB
  • ACDelco: 14105S
  • Dayco: 87660
  • Ford: F1SZ 8597 B
  • Canadian Tire: 14-2102-4
  • Dayco: C87660
  • Carquest: 18798
  • Isuzu: 8941531851
  • Motorcraft: KH-85
  • Dayco: 71575

APPLICATIONS:

  • 2010-2017 Toyota Prius - Position: Pipe-5 To Pipe-6
    • Cut to fit
  • 2003-2005 Mercury Mountaineer - Position: Pipe-3 To Auxiliary Heater
    • W/O Oil Cooler; W/Aux. A.C.; W/Aux. Heater
  • 2004-2004 Ford Explorer - Position: Pipe-3 To Auxiliary Heater
    • W/O Eng. Oil Cooler; W/Aux. A.C.; W/Aux. Heater
  • 1985-1988 Chevrolet Cavalier - Position: Pipe-2 To Thermostat
  • 2012-2017 Toyota Prius V - Position: Pipe-5 To Pipe-6
    • Cut to fit
  • 2012-2015 Toyota Prius Plug-In - Position: Pipe-5 To Pipe-6
    • Cut to fit
  • 1990-1990 Ford Cougar
  • 1991-1991 Ford Thunderbird
    • Apr. & Older
  • 1989-1990 Ford Thunderbird
  • 1998-2003 Toyota Sienna - Position: Heater To Valve
    • W/Aux. Heater; Cut to fit
  • 2005-2005 Ford Explorer - Position: Pipe-3 To Auxiliary Heater
    • W/O Oil Cooler; W/Aux. A.C.; W/Aux. Heater
  • 2003-2003 Ford Explorer - Position: Pipe-3 To Auxiliary Heater
    • W/O Oil Cooler; W/Aux. A.C.; W/Aux. Heater
  • 2011-2014 Lexus CT200h - Position: Pipe-5 To Pipe-6
    • Cut to fit
  • 2017-2017 Toyota Prius Prime - Position: Pipe-5 To Pipe-6
    • Cut to fit
  • 1985-1987 Oldsmobile Firenza - Position: Pipe-2 To Thermostat
  • 1985-1988 Cadillac Cimarron - Position: Pipe-2 To Thermostat
  • 1992-1993 Ford Cougar
  • 1992-1993 Mercury Cougar
  • 1991-1991 Ford Cougar
    • Mar. & Older
  • 1989-1990 Mercury Cougar
  • 1992-1993 Ford Thunderbird
  • 1991-1991 Mercury Cougar
    • Mar. & Older
  • 1986-1987 Isuzu Pickup - Position: Pipe To Engine
  • 1980-1982 Mazda RX-7 - Position: Pipe To Radiator
    • Cut to fit
  • 1986-1987 Isuzu Trooper - Position: Pipe To Engine

Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
10.2
Centerline Length (Millimeter):
259
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.62
End 1 Inside Diameter (Millimeter):
16
End 2 Inside Diameter (Inch):
.62
End 2 Inside Diameter (Millimeter):
16
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.1867
Height - Each (Inch):
1.2400
Length - Each (Inch):
8.1600
Width - Each (Inch):
3.0600
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Item Level GTIN:
00072053179422
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top