×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 18813 | HVAC Heater Hose
click to zoom in

Gates 18813 | HVAC Heater Hose

(No reviews yet) Write a Review
$12.99
Part Number
GAT18813
UPC:
72053179491
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • 1998-1994 Ford, Mustang, V-6 3.8 L, By Pass
  • Premium Molded Heater Hose
  • Molded Heater Hose
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)9.8
Centerline Length (mm)249
End 1 Inside Diameter16
End 1 Inside Diameter.62
End 2 Inside Diameter16
End 2 Inside Diameter.62
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • Ford: F6ZE 8A582 CA
  • Dayco: 87670
  • Ford: F4ZZ 8597 B
  • Ford: F6ZE 8A582 CB
  • Motorcraft: KM-3071
  • Datsun/Nissan: 9240009G00
  • Carquest: 18813
  • Ford: F4SE 8A582 BA
  • Toyota: 8724510180
  • Dayco: B87670
  • Datsun/Nissan: 9240057G10
  • Datsun/Nissan: 9240057G00
  • Dayco: 71685
  • ACDelco: 14114S
  • Ford: F6ZZ 8597 C
  • Ford: F4ZZ 8597 A
  • Goodyear: 63206
  • Motorcraft: KM-2453
  • Ford: F4ZE 8A582 BB
  • Dayco: A71685
  • NAPA Belts/Hose: 10813
  • Toyota: 8724510091
  • Ford: F4ZE 8A582 BA
  • Datsun/Nissan: 9240009G10

APPLICATIONS:

  • 1981-1982 Toyota Starlet - Position: Heater To Valve
  • 1986-1992 Nissan D21 - Position: Heater To Pipe-1
    • Cut to fit
  • 1983-1984 Toyota Starlet - Position: Heater To Valve
    • Cut to fit
  • 1994-1997 Ford Thunderbird
    • Cut to fit
  • 1994-1997 Mercury Cougar
    • Cut to fit
  • 1995-1995 Nissan Pathfinder - Position: Heater To Tee-2
  • 1993-1994 Nissan D21 - Position: Heater To Pipe-1
  • 1993-1994 Nissan Pathfinder - Position: Heater To Pipe-1
  • 1987-1992 Nissan Pathfinder - Position: Heater To Pipe-1
    • Cut to fit
  • 1995-1995 Nissan Pickup - Position: Heater To Tee-2
    • Cut to fit
  • 1994-1998 Ford Mustang - Position: Pipe-2 To Tee
  • 1994-1998 Ford Mustang
    • Cut to fit
  • 1994-1994 Ford Cougar
    • Cut to fit
  • 1993-1993 Nissan D21 - Position: Heater To Pipe-1
    • Jun. 1993 & Older; Cut to fit
  • 1993-1993 Nissan Pathfinder - Position: Heater To Pipe-1
    • Jun. 1993 & Older; Cut to fit

Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
9.8
Centerline Length (Millimeter):
249
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.62
End 1 Inside Diameter (Millimeter):
16
End 2 Inside Diameter (Inch):
.62
End 2 Inside Diameter (Millimeter):
16
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.1958
Height - Each (Inch):
1.2400
Length - Each (Inch):
7.8400
Width - Each (Inch):
2.9400
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Item Level GTIN:
00072053179491
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top