Gates 19104 | HVAC Heater Hose
5 customers are viewing this product
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4” to 1”.
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- 2000 Ford, Ranger, 4-Cyl. 2.5 L, Valve To Intake Manifold
- Premium Molded Heater Hose
- Premium Molded Heater Hose
- Molded Heater Hose
SPECIFICS:
Branch Quantity | 0 |
Centerline Length (in) | 19.5 |
Centerline Length (mm) | 495 |
End 1 Inside Diameter | .6 |
End 1 Inside Diameter | 15 |
End 2 Inside Diameter | .6 |
End 2 Inside Diameter | 15 |
Material | EPDM |
Molded | Yes |
Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Ford: F87H 18472 CA
- NAPA Belts/Hose: 11104
- Ford: F87Z 18472 CA
- Ford: F50H 18K580 AA
- ACDelco: 18241L
- Carquest: 19104
- Ford: F50Y 18472 B
APPLICATIONS:
- 1999-2000 Mazda B2500 - Position: Valve To Intake Manifold
- 2000-2000 Ford Ranger - Position: Valve To Intake Manifold
- 2001-2001 Ford Ranger - Position: Valve To Thermostat
- 2000-2000 Ford F-100 Ranger - Position: Valve To Intake Manifold
- 2001-2001 Mazda B2500 - Position: Valve To Thermostat
- 1995-1997 Lincoln Continental - Position: Heater To Pipe-1
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
19.5
Centerline Length (Millimeter):
495
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.6
End 1 Inside Diameter (Millimeter):
15
End 2 Inside Diameter (Inch):
.6
End 2 Inside Diameter (Millimeter):
15
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.3900
Weight - Case (Gross Pounds):
4.3980
Height - Each (Inch):
1.2000
Height - Case (Inch):
7.8750
Length - Each (Inch):
10.8750
Life Cycle Status Description:
Available Only While Supplies Last
Length - Case (Inch):
10.8750
Item Level GTIN:
00072053466218
Width - Each (Inch):
8.8750
Quantity Per Application:
1
Width - Case (Inch):
8.8750