×
close
click to zoom in

Gates 19122 | HVAC Heater Hose

(No reviews yet) Write a Review
$13.00
Part Number
GAT19122
UPC:
72053466362
Condition:
New
5 customers are viewing this product

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Premium Molded Heater Hose
  • 2012-08 Chevrolet, Colorado, 5-Cyl. 3.7 L, Pipe-1 To Eng.
  • Premium Molded Heater Hose
  • Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)11.4
Centerline Length (mm)290
End 1 Inside Diameter15
End 1 Inside Diameter.59
End 2 Inside Diameter15
End 2 Inside Diameter.59
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

Cut to fit

DOWNLOADS:

INTERCHANGE:

  • ACDelco: 14318S
  • General Motors: 89019084
  • Carquest: 19122
  • General Motors: 25913089
  • NAPA Belts/Hose: 11122
  • Toyota: G922648040
  • General Motors: 10284268

APPLICATIONS:

  • 2008-2012 GMC Canyon - Position: Pipe-1 To Engine
  • 2008-2008 Isuzu i-370 - Position: Pipe-1 To Engine
  • 2008-2012 Chevrolet Colorado - Position: Pipe-1 To Engine
  • 1996-1996 Oldsmobile Cutlass Supreme - Position: Pipe-1 To Pipe-2
  • 2010-2014 Lexus RX450h - Position: Inverter Cooling Hose-2
  • 1996-1997 Chevrolet Monte Carlo - Position: Pipe-1 To Pipe-2
  • 2011-2013 Toyota Highlander - Position: Inverter Cooling Hose-2
  • 1996-1996 Pontiac Grand Prix - Position: Pipe-1 To Pipe-2
  • 1996-1997 Chevrolet Lumina - Position: Pipe-1 To Pipe-2

1-year Replacement unlimited-mileage warranty
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
11.4
Centerline Length (Millimeter):
290
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.59
End 1 Inside Diameter (Millimeter):
15
End 2 Inside Diameter (Inch):
.59
End 2 Inside Diameter (Millimeter):
15
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.3000
Weight - Case (Gross Pounds):
6.4980
Height - Each (Inch):
1.1800
Height - Case (Inch):
7.8750
Length - Each (Inch):
9.1200
Life Cycle Status Description:
Available Only While Supplies Last
Length - Case (Inch):
10.8750
Item Level GTIN:
00072053466362
Width - Each (Inch):
3.4200
Quantity Per Application:
1
Width - Case (Inch):
8.8750



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top