click to zoom in
Gates 19444 | HVAC Heater Hose
5 customers are viewing this product
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4” to 1”.
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Premium Molded Heater Hose
- 2006-02 Dodge, Stratus, 4-Cyl. 2.4 L, Pipe-1 To Heater
- Molded Heater Hose
- Premium Molded Heater Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length (in) | 7.7 |
| Centerline Length (mm) | 196 |
| End 1 Inside Diameter | .62 |
| End 1 Inside Diameter | 16 |
| End 2 Inside Diameter | 19 |
| End 2 Inside Diameter | .75 |
| Material | EPDM |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Carquest: 19444
- Goodyear: 64253
- NAPA Belts/Hose: 11444
- Chrysler: 4596704AB
- ACDelco: 14461S
- Dayco: 87988
- Chrysler: 4596704AA
APPLICATIONS:
- 2001-2001 Dodge Stratus - Position: Heater To Pipe-2
- 2001-2001 Chrysler Sebring - Position: Heater To Pipe-2
- 2002-2006 Dodge Stratus - Position: Pipe-1 To Heater
- 2001-2001 Chrysler Sebring - Position: Heater To Pipe-1
- 2002-2006 Chrysler Sebring - Position: Pipe-1 To Heater
- 2001-2001 Dodge Stratus - Position: Heater To Pipe-1
1-year Replacement unlimited-mileage warranty
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
7.2
Centerline Length (Millimeter):
183
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.62
End 1 Inside Diameter (Millimeter):
16
End 2 Inside Diameter (Inch):
.75
End 2 Inside Diameter (Millimeter):
19
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.1755
Weight - Case (Gross Pounds):
197.6950
Height - Each (Inch):
1.5000
Height - Case (Inch):
27.0600
Length - Each (Inch):
6.1600
Life Cycle Status Description:
Available Only While Supplies Last
Length - Case (Inch):
43.9050
Item Level GTIN:
00770075249597
Width - Each (Inch):
2.3100
Quantity Per Application:
1
Width - Case (Inch):
35.4050