×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 19609 | HVAC Heater Hose
click to zoom in

Gates 19609 | HVAC Heater Hose

(No reviews yet) Write a Review
$22.99
Part Number
GAT19609
UPC:
72053178418
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Premium Molded Heater Hose
  • 2012-08 Chevrolet, Malibu, 4-Cyl. 2.4 L, Heater To Thermostat
  • Premium Molded Heater Hose
  • Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)22.6
Centerline Length (mm)574
End 1 Inside Diameter.75
End 1 Inside Diameter19
End 2 Inside Diameter.75
End 2 Inside Diameter19
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • Carquest: 19609
  • Dayco: B86071
  • ACDelco: 16145M
  • General Motors: 25910784
  • General Motors: 1631559
  • General Motors: 10135671
  • NAPA Belts/Hose: 11609
  • Ultralast: 19609
  • Dayco: 88356
  • General Motors: 10135686
  • Goodyear: 63141
  • Dayco: 86071
  • General Motors: 25822193

APPLICATIONS:

  • 2008-2012 Chevrolet Malibu - Position: Heater To Thermostat
    • Cut to fit
  • 1992-1995 Oldsmobile Silhouette - Position: Tee-1 To Pipe-1
  • 1986-1988 Cadillac Fleetwood - Position: Heater To Tee-1
  • 1992-1995 Pontiac Trans Sport - Position: Tee-1 To Pipe-1
  • 1990-1991 Oldsmobile Silhouette - Position: Auxiliary Heater Pipe-3 To Auxiliary Heater Pipe-4
    • Cut to fit
  • 1990-1991 Chevrolet Lumina APV - Position: Auxiliary Heater Pipe-3 To Auxiliary Heater Pipe-4
    • Cut to fit
  • 1985-1985 Cadillac Commercial Chassis - Position: Heater To Tee-1
    • Cut to fit
  • 1989-1989 Cadillac Fleetwood - Position: Heater To Tee-1
    • Cut to fit
  • 1992-1995 Chevrolet Lumina APV - Position: Tee-1 To Pipe-1
  • 1995-1995 Chevrolet Lumina Van - Position: Heater To Pipe-1
    • W/O Aux. Heater; Cut to fit
  • 1992-1995 Pontiac Trans Sport - Position: Heater To Pipe-1
    • W/O Aux. Heater; Cut to fit
  • 1986-1988 Cadillac Commercial Chassis - Position: Heater To Tee-1
  • 1985-1985 Cadillac DeVille - Position: Heater To Tee-1
    • Cut to fit
  • 1986-1988 Cadillac DeVille - Position: Heater To Tee-1
  • 1990-1991 Pontiac Trans Sport - Position: Auxiliary Heater Pipe-3 To Auxiliary Heater Pipe-4
    • Cut to fit
  • 1989-1989 Cadillac DeVille - Position: Heater To Tee-1
    • Cut to fit
  • 1985-1985 Cadillac Fleetwood - Position: Heater To Tee-1
    • Cut to fit
  • 1989-1989 Cadillac Commercial Chassis - Position: Heater To Tee-1
    • Cut to fit
  • 1995-1995 Chevrolet Lumina Van - Position: Tee-1 To Pipe-1
  • 1992-1995 Oldsmobile Silhouette - Position: Heater To Pipe-1
    • W/O Aux. Heater; Cut to fit
  • 1992-1995 Chevrolet Lumina APV - Position: Heater To Pipe-1
    • W/O Aux. Heater; Cut to fit

Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
22.6
Centerline Length (Millimeter):
574
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.75
End 1 Inside Diameter (Millimeter):
19
End 2 Inside Diameter (Inch):
.75
End 2 Inside Diameter (Millimeter):
19
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.5700
Weight - Case (Gross Pounds):
53.9410
Height - Each (Inch):
1.5000
Height - Case (Inch):
19.3750
Length - Each (Inch):
18.0800
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Length - Case (Inch):
26.3750
Item Level GTIN:
00072053178418
Width - Each (Inch):
6.7800
Quantity Per Application:
1
Width - Case (Inch):
12.3750



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top