×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 19625 | HVAC Heater Hose
click to zoom in

Gates 19625 | HVAC Heater Hose

(No reviews yet) Write a Review
$12.99
Part Number
GAT19625
UPC:
72053178579
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Molded Heater Hose
  • 2010-08 Infiniti, G37, V-6 3.7 L, Connector To Eng.
  • Premium Molded Heater Hose
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)10.6
Centerline Length (mm)269
End 1 Inside Diameter.75
End 1 Inside Diameter19
End 2 Inside Diameter.75
End 2 Inside Diameter19
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • General Motors: 52362059
  • Dayco: 86061
  • Goodyear: 64328
  • Dayco: B88371
  • Carquest: 19625
  • Goodyear: 63494
  • ACDelco: 14183S
  • General Motors: 52362060
  • General Motors: 52362016
  • Dayco: 88371
  • General Motors: 10258504
  • Dayco: 86037
  • NAPA Belts/Hose: 11625
  • Dayco: B86061
  • General Motors: 52362078
  • Datsun/Nissan: 92402JK20A
  • Ford: F1SZ 18472 B

APPLICATIONS:

  • 2007-2008 Infiniti G35 - Position: Connector To Engine
    • Cut to fit
  • 1991-1993 Mercury Cougar - Position: Heater To Pipe-2
  • 2011-2013 Infiniti M37 - Position: Crossover Pipe To Connector
    • Cut to fit
  • 1991-1993 Ford Cougar - Position: Heater To Pipe-2
  • 2014-2015 Infiniti Q50 - Position: Connector To Engine
    • Cut to fit
  • 1994-1994 Chevrolet Commercial Chassis - Position: Tee To Tank
    • Cut to fit
  • 1994-1996 Chevrolet Caprice - Position: Tee To Tank
    • Cut to fit
  • 1990-1990 Buick Regal - Position: Pipe-1 To Water Pump
    • Cut to fit
  • 2014-2015 Infiniti Q60 - Position: Heater Core Inlet To Engine
    • Cut to fit
  • 2014-2015 Infiniti Q50 - Position: Heater Core Inlet To Engine
  • 1991-1993 Buick Regal - Position: Pipe-1 To Water Pump
  • 1994-1996 Cadillac Commercial Chassis - Position: Tee To Tank
    • Cut to fit
  • 2013-2013 Infiniti G37 - Position: Heater Core Inlet To Engine
  • 1991-1993 Ford Thunderbird - Position: Heater To Pipe-2
  • 2008-2012 Infiniti EX35 - Position: Connector To Engine
  • 2009-2012 Infiniti FX35 - Position: Connector To Engine
  • 2015-2017 Infiniti Q70L - Position: Heater Core Inlet To Engine
  • 2014-2017 Infiniti Q70 - Position: Heater Core Inlet To Engine
  • 1994-1996 Chevrolet Impala - Position: Tee To Tank
    • Cut to fit
  • 1995-1995 Buick Regal - Position: Pipe-2 To Pipe-3
    • W/O H.D. Cool.
  • 1994-1996 Buick Roadmaster - Position: Tee To Tank
    • Cut to fit
  • 2016-2017 Infiniti QX50 - Position: Connector To Pipe
  • 1994-1996 Buick Commercial Chassis - Position: Tee To Tank
    • Cut to fit
  • 2015-2015 Infiniti Q40 - Position: Heater Core Inlet To Engine
  • 2011-2012 Infiniti G25 - Position: Tee To Engine
  • 2008-2010 Infiniti G37 - Position: Connector To Engine
    • Cut to fit
  • 1994-1994 Buick Regal - Position: Pipe-2 To Pipe-3
    • W/H.D. Cool.
  • 2011-2012 Infiniti G37 - Position: Heater Inlet (Front)
  • 1994-1996 Cadillac Fleetwood - Position: Tee To Tank
    • Cut to fit
  • 2009-2017 Nissan 370Z - Position: Tee To Engine

Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
10.6
Centerline Length (Millimeter):
269
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.75
End 1 Inside Diameter (Millimeter):
19
End 2 Inside Diameter (Inch):
.75
End 2 Inside Diameter (Millimeter):
19
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.2328
Weight - Case (Gross Pounds):
176.3800
Height - Each (Inch):
1.5000
Height - Case (Inch):
27.0600
Length - Each (Inch):
8.4800
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Length - Case (Inch):
43.9050
Item Level GTIN:
00072053178579
Width - Each (Inch):
3.1800
Quantity Per Application:
1
Width - Case (Inch):
35.4050



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top