click to zoom in
Gates 20458 | Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Premium Molded Coolant Hose
- Premium Molded Coolant Hose
- 1978-1975 Toyota, Land Cruiser, 6-Cyl. 258, Lower - Eng. To Pipe
- Molded Coolant Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length | 10.8 |
| Centerline Length | 274 |
| Contains Spring | No |
| End 1 Inside Diameter | 44 |
| End 1 Inside Diameter | 1.75 |
| End 2 Inside Diameter | 2.25 |
| End 2 Inside Diameter | 57 |
| Material | EPDM |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Durkee-Atwood: MR796
- Carquest: 20458
- NAPA Belts/Hose: 7407
- ACDelco: 20023S
- Goodyear: 60655
- International Harvester (IHC): 237479R1
- Motorcraft: KM-589
APPLICATIONS:
- 1975-1978 Toyota Land Cruiser - Position: Lower - Engine To Pipe
- W/O A.C.; Cut to fit
- 1963-1964 International C1200 - Position: Upper
- Eng. No. 104,300 & Before
- 1961-1961 International C100 - Position: Upper
- Eng. No. 104,300 & Before
- 1961-1961 International C130 - Position: Upper
- Eng. No. 104,300 & Before
- 1965-1965 International D1200 - Position: Upper
- Eng. No. 104,300 & Before
- 1963-1964 International C1000 - Position: Upper
- Eng. No. 104,300 & Before
- 1963-1964 International C1100 - Position: Upper
- Eng. No. 104,300 & Before
- 1965-1965 International D1300 - Position: Upper
- Eng. No. 104,300 & Before
- 1965-1965 International D1000 - Position: Upper
- Eng. No. 104,300 & Before
- 1961-1962 International C120 - Position: Upper
- Eng. No. 104,300 & Before
- 1965-1965 International D1100 - Position: Upper
- Eng. No. 104,300 & Before
- 1961-1961 International C110 - Position: Upper
- Eng. No. 104,300 & Before
- 1963-1964 International C1300 - Position: Upper
- Eng. No. 104,300 & Before
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
10.8
Centerline Length (Millimeter):
274
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1.75
End 1 Inside Diameter (Millimeter):
44
End 2 Inside Diameter (Inch):
2.25
End 2 Inside Diameter (Millimeter):
57
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.8700
Weight - Case (Gross Pounds):
23.0170
Height - Each (Inch):
3.5000
Life Cycle Status Description:
Available Only While Supplies Last
Height - Case (Inch):
9.8750
Item Level GTIN:
00072053051261
Length - Each (Inch):
8.6400
Quantity Per Application:
1
Length - Case (Inch):
22.0000
Width - Each (Inch):
3.2400
Width - Case (Inch):
12.0000