×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 20566 | Right Radiator Coolant Hose
click to zoom in

Gates 20566 | Right Radiator Coolant Hose

(No reviews yet) Write a Review
$10.99
Part Number
GAT20566
UPC:
72053051803
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

  • Recommend for upper, lower, by-pass, heater and other coolant hose applications.
  • Heat and ozone resistant cover.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
  • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.

Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Premium Molded Coolant Hose
  • Molded Coolant Hose
  • 1972-1969 Chevrolet, C50, GM V-8 350, By Pass - Right Side
  • Premium Molded Coolant Hose

SPECIFICS:

Branch Quantity0
Centerline Length8.1
Centerline Length206
Contains SpringNo
End 1 Inside Diameter1
End 1 Inside Diameter25
End 2 Inside Diameter25
End 2 Inside Diameter1
MaterialEPDM
Modular HoseNo
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • Durkee-Atwood: BP891
  • ACDelco: 20041S
  • Goodyear: 63750
  • Ultralast: BP0566
  • : 2104733M12
  • International Harvester (IHC): 478045C1
  • BF Goodrich: MH380
  • Motorcraft: KM-2082
  • Dayco: 70564
  • Canadian Tire: 14-2106-6
  • Epton: MH380
  • Dayco: A70564
  • Mopar: BH-1535
  • CARQUEST: 20566
  • General Motors: 3839178
  • Durkee-Atwood: MR891
  • Datsun/Nissan: 2104733M10
  • Allis Chalmers: 1164494
  • Dayco: 564
  • Motorcraft: KM-643
  • NAPA Belts/Hose: 7430
  • Atlas (Canada): MH-3566
  • Ultralast: C0566
  • : 10490184

APPLICATIONS:

  • 1967-1967 Chevrolet K10 Suburban
  • 1967-1967 GMC C15/C1500 Pickup
  • 1969-1972 Chevrolet C50 - Position: Right
  • 1967-1967 GMC K15/K1500 Pickup
  • 1984-1985 Nissan Sentra - Position: Lower - Engine To Pipe
    • Re-use existing protective collar.
  • 1973-1973 Fiat 850 - Position: Upper
  • 1966-1967 Chevrolet C10 Pickup
  • 1967-1967 Chevrolet K20 Panel
  • 1967-1967 GMC C35/C3500 Pickup
  • 1967-1967 Chevrolet C10 Suburban
  • 1967-1967 Chevrolet K20 Suburban
  • 1986-1986 Nissan Sentra - Position: Lower - Engine To Pipe
    • Re-use existing protective collar.; Cut to fit
  • 1986-1986 Nissan Pulsar NX - Position: Lower - Engine To Pipe
    • Re-use existing protective collar.; Cut to fit
  • 1967-1967 GMC K25/K2500 Suburban
  • 1967-1967 GMC C25/C2500 Suburban
  • 1969-1972 Chevrolet C60 - Position: Right
  • 1967-1967 Chevrolet C20 Suburban
  • 1966-1967 Chevrolet C20 Pickup
  • 1966-1967 Chevrolet C30 Pickup
  • 1966-1967 Chevrolet K20 Pickup
  • 1967-1967 GMC C15/C1500 Suburban
  • 1967-1967 GMC K15/K1500 Suburban
  • 1966-1966 Chevrolet Suburban
  • 1967-1967 GMC K25/K2500 Pickup
  • 1967-1967 GMC C25/C2500 Pickup
  • 1966-1967 Chevrolet K10 Pickup

Attributes
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
8.1
Centerline Length (Millimeter):
206
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1
End 1 Inside Diameter (Millimeter):
25
End 2 Inside Diameter (Inch):
1
End 2 Inside Diameter (Millimeter):
25
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.4100
Height - Each (Inch):
2.0000
Length - Each (Inch):
6.4800
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Width - Each (Inch):
2.4300
Item Level GTIN:
00072053051803
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top