click to zoom in
Gates 20802 | Upper Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Premium Molded Coolant Hose
- Molded Coolant Hose
- 2014-08 Subaru, Tribeca, 6-Cyl. 3.6 L, Rad. To Rad. Filler Neck
- Premium Molded Coolant Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length | 7.2 |
| Centerline Length | 183 |
| Contains Spring | No |
| End 1 Inside Diameter | 23 |
| End 1 Inside Diameter | .92 |
| End 2 Inside Diameter | .92 |
| End 2 Inside Diameter | 23 |
| Material | EPDM |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- ACDelco: 14214S
- Dayco: 86054
- Beck/Arnley: 142-1411
- Yale: BM539992
- John Deere: R47430
- Suzuki: 1785563B21
- Carquest: 20802
- NAPA Belts/Hose: 7565
: 4382659 - Vera: 54-00965
- Datsun/Nissan: 2150145010
- Ultra: 30 36211
- John Deere: 62X24966A
- Lazorlite: L34-1568
- Subaru (cars): 45161XA040
- Ultra: 30 33250
- Ultralast: C0802
- Yale: 5007201
- Motorcraft: KM-4477
- Yale: BM539991
- Caterpillar: 4W7080
: 12A409 : GRH244 - Subaru (cars): 45161XA04A
- Yale: AM52749
: 2138767 : GRH313 - Caterpillar: 1W1140
- Motorcraft: KM-3148
: GRH467 - Beck/Arnley: 142-2377
- Freightliner Trucks: 0517274000
- Datsun/Nissan: 21501H5010
- Dayco: B86054
: AHA7981 - MacKay: CH1047
: GRH245 - Beck/Arnley: 142-1296
- Uniroyal: MC92
: 39402314 - Datsun/Nissan: 21501H5000
- Worldparts: W50-395
- British Leyland: 12G1163
- General Motors: 30005547
- Caterpillar: 8N760
: 34402314 : 4346416 - Vera: 54-02225
: 2A2082 - Lazorlite: U34-5997
- British Leyland: AHA8730
APPLICATIONS:
- 1960-1967 Austin Healey Sprite - Position: Upper
- 1968-1972 Austin America - Position: Upper
- 1976-1979 Lancia Beta - Position: Upper - Pipe To Thermostat
- 1968-1970 Austin Healey Sprite - Position: Lower - Pipe To Radiator
- 1998-2001 Chevrolet Metro - Position: Lower - Engine To Pipe
- 1962-1967 MG Midget - Position: Upper
- 2006-2007 Subaru B9 Tribeca - Position: Radiator To Radiator Filler Neck
- 2008-2014 Subaru Tribeca - Position: Radiator To Radiator Filler Neck
- 1992-1997 Geo Metro - Position: Lower - Engine To Pipe
- 1974-1974 Nissan B210 - Position: Upper
- 1992-1992 Chevrolet Metro - Position: Lower - Engine To Pipe
- 1995-2001 Suzuki Swift - Position: Lower - Engine To Pipe
- 1968-1974 MG Midget - Position: Lower - Pipe To Radiator
- 1995-1999 Pontiac Firefly - Position: Lower - Engine To Pipe
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
7.2
Centerline Length (Millimeter):
183
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.92
End 1 Inside Diameter (Millimeter):
23
End 2 Inside Diameter (Inch):
.92
End 2 Inside Diameter (Millimeter):
23
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.3000
Height - Each (Inch):
1.8400
Length - Each (Inch):
5.7600
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Width - Each (Inch):
2.1600
Item Level GTIN:
00072053053159
Quantity Per Application:
1