click to zoom in
Gates 20928 | Upper Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Molded Coolant Hose
- Premium Molded Coolant Hose
- 1979-1974 Mercedes-Benz, 450SEL, V-8 276, Upper
- Premium Molded Coolant Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length | 417 |
| Centerline Length | 16.4 |
| Contains Spring | No |
| End 1 Inside Diameter | 1.38 |
| End 1 Inside Diameter | 35 |
| End 2 Inside Diameter | 1.56 |
| End 2 Inside Diameter | 40 |
| Material | EPDM |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Ultralast: C0928
- International Harvester (IHC): 470332C1
- General Motors: 1336772
- Beck/Arnley: 142-5904
- Carquest: 20928
- Goodyear: 60801
- Mopar: BH-1585
- Vera: 54-05308
- ACDelco: 22091M
- Mercedes-Benz: 1165011082
- Beck/Arnley: 142-0603
- Alfa Romeo: 1165012582
- Towmotor: 0A2399
: 3430510 - Durkee-Atwood: MR942
- Allis Chalmers: 4025594
- Allis Chalmers: 4025595
- Vera: 54-03636
- Beck/Arnley: 142-5905
- Mercedes-Benz: 1165011482
- NAPA Belts/Hose: 7653
- Motorcraft: KM-677
APPLICATIONS:
- 1969-1973 Opel Opel - Position: Upper
- 1974-1980 Mercedes-Benz 450SEL - Position: Upper
- 1976-1977 International Scout II - Position: Upper - Engine To Pipe
- 1974-1976 Mercedes-Benz 450SE - Position: Upper
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
16.4
Centerline Length (Millimeter):
417
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1.38
End 1 Inside Diameter (Millimeter):
35
End 2 Inside Diameter (Inch):
1.56
End 2 Inside Diameter (Millimeter):
40
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.7900
Weight - Case (Gross Pounds):
34.2410
Height - Each (Inch):
2.7600
Life Cycle Status Description:
Available Only While Supplies Last
Height - Case (Inch):
19.3750
Item Level GTIN:
00072053053975
Length - Each (Inch):
13.1200
Quantity Per Application:
1
Length - Case (Inch):
26.3750
Width - Each (Inch):
4.9200
Width - Case (Inch):
12.3750