click to zoom in
Gates 20967 | Lower Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Molded Coolant Hose
- Premium Molded Coolant Hose
- 1988-1980 GMC, Brigadier, Detroit Diesel 6-71 Diesel, Lower - Pipe To Rad.
- Premium Molded Coolant Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length | 15.1 |
| Centerline Length | 384 |
| Contains Spring | Yes |
| End 1 Inside Diameter | 2.38 |
| End 1 Inside Diameter | 60 |
| End 2 Inside Diameter | 2.76 |
| End 2 Inside Diameter | 70 |
| Material | EPDM |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- John Deere: R35305
- General Motors: 2004780
- General Motors: 2004785
- Allis Chalmers: 4799802
- Allis Chalmers: 4810415
- Durkee-Atwood: MR214
- ACDelco: 22099M
- NAPA Belts/Hose: 7704
- Carquest: 20967
- General Motors: 676194
- Mopar: BH-1608
- General Motors: 704491
- Motorcraft: KM-704
- General Motors: 2010259
- Goodyear: 60825
- General Motors: 2066799
APPLICATIONS:
- 1981-1982 GMC Astro - Position: Lower
- 1981-1988 GMC Brigadier - Position: Lower - Pipe To Radiator
- W/Metal Hood; W/Turbo
- 1981-1981 GMC Brigadier - Position: Lower
- W/Metal Hood
- 1988-1989 White/GMC J9C0 - Position: Lower - Pipe To Radiator
- W/Metal Hood; W/Turbo
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' m
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
15.1
Centerline Length (Millimeter):
384
Branch Quantity:
0
End 1 Inside Diameter (Inch):
2.38
End 1 Inside Diameter (Millimeter):
60
End 2 Inside Diameter (Inch):
2.76
End 2 Inside Diameter (Millimeter):
70
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
1.7300
Weight - Case (Gross Pounds):
54.5410
Height - Each (Inch):
4.7600
Life Cycle Status Description:
Available Only While Supplies Last
Height - Case (Inch):
19.3750
Item Level GTIN:
00072053054224
Length - Each (Inch):
12.0800
Quantity Per Application:
1
Length - Case (Inch):
26.3750
Width - Each (Inch):
4.5300
Width - Case (Inch):
12.3750