click to zoom in
Gates 21352 | Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Premium Molded Coolant Hose
- Molded Coolant Hose
- Premium Molded Coolant Hose
- 2000-1997 Hyundai, Tiburon, 4-Cyl. 2.0 L, Lower
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length | 21.4 |
| Centerline Length | 544 |
| Contains Spring | No |
| End 1 Inside Diameter | 34 |
| End 1 Inside Diameter | 1.34 |
| End 2 Inside Diameter | 34 |
| End 2 Inside Diameter | 1.34 |
| Material | EPDM |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Datsun/Nissan: 21504D0102
- Dayco: 71371
- Firestone: 51319672
- Atlas (Canada): MH-4352
- Durkee-Atwood: 41335
- Goodyear: 535
- Carquest: 21352
- ACDelco: 24141L
- Goodyear: 61335
- Dayco: 71150
- Motorcraft: KM-1589
- NAPA Belts/Hose: 8053
APPLICATIONS:
- 1984-1984 Nissan Stanza - Position: Lower - Pipe To Radiator
- Early
- 1997-1997 Hyundai Tiburon - Position: Lower
- 1982-1983 Nissan Stanza - Position: Lower - Pipe To Radiator
- 1999-1999 Chevrolet Tracker - Position: Lower
- Cut to fit
- 2000-2000 Hyundai Tiburon - Position: Lower
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' m
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
21.4
Centerline Length (Millimeter):
544
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1.34
End 1 Inside Diameter (Millimeter):
34
End 2 Inside Diameter (Inch):
1.34
End 2 Inside Diameter (Millimeter):
34
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
1.1000
Weight - Case (Gross Pounds):
41.1410
Height - Each (Inch):
2.6800
Life Cycle Status Description:
Available Only While Supplies Last
Height - Case (Inch):
19.3750
Item Level GTIN:
00072053057195
Length - Each (Inch):
17.1200
Quantity Per Application:
1
Length - Case (Inch):
26.3750
Width - Each (Inch):
6.4200
Width - Case (Inch):
12.3750