Gates 21513 | Lower Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Molded Coolant Hose
- Premium Molded Coolant Hose
- Premium Molded Coolant Hose
- 1988-1985 Chevrolet, Spectrum, 4-Cyl. 1.5 L, Lower
SPECIFICS:
Branch Quantity | 0 |
Centerline Length | 18.4 |
Centerline Length | 467 |
Contains Spring | No |
End 1 Inside Diameter | 1.12 |
End 1 Inside Diameter | 28 |
End 2 Inside Diameter | 28 |
End 2 Inside Diameter | 1.12 |
Material | EPDM |
Modular Hose | No |
Molded | Yes |
Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Beck/Arnley: 142-6032
- Beck/Arnley: 142-6131
- Isuzu: 8941183553
- Lazorlite: L34-5881
- Goodyear: 61756
- Isuzu: 8944608980
- Atlas (Canada): MH-4513
- General Motors: 94108576
- NAPA Belts/Hose: 8194
- Beck/Arnley: 142-6031
- Motorcraft: KM-2194
: 8941085763 - Dayco: C71275
- Isuzu: 894118355
- General Motors: 94424122
- ACDelco: 22193M
- Goodyear: 570
- Carquest: 21513
- Beck/Arnley: 142-6132
- Ultralast: C1513
- Dayco: 71275
- General Motors: 94118355
- Isuzu: 8944241221
- Lazorlite: L34-5890
- Isuzu: 8941085764
- Isuzu: 894108576
APPLICATIONS:
- 1987-1988 Pontiac Sunburst - Position: Lower
- 1985-1989 Isuzu I-Mark - Position: Lower
- 1985-1988 Chevrolet Spectrum - Position: Lower
- 1989-1989 Geo Spectrum - Position: Lower
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' m
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
18.4
Centerline Length (Millimeter):
467
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1.12
End 1 Inside Diameter (Millimeter):
28
End 2 Inside Diameter (Inch):
1.12
End 2 Inside Diameter (Millimeter):
28
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.6900
Weight - Case (Gross Pounds):
20.1330
Height - Each (Inch):
2.2400
Life Cycle Status Description:
Available Only While Supplies Last
Height - Case (Inch):
13.0000
Item Level GTIN:
00072053058635
Length - Each (Inch):
14.7200
Quantity Per Application:
1
Length - Case (Inch):
22.0000
Width - Each (Inch):
5.5200
Width - Case (Inch):
18.0000