click to zoom in
Gates 22141 | Upper Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- 1991-1989 Chevrolet, G Series Van, V-8 7.4 L, Upper
- Premium Molded Coolant Hose
- Molded Coolant Hose
- Premium Molded Coolant Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length | 30.7 |
| Centerline Length | 780 |
| Contains Spring | No |
| End 1 Inside Diameter | 1.25 |
| End 1 Inside Diameter | 32 |
| End 2 Inside Diameter | 1.5 |
| End 2 Inside Diameter | 38 |
| Material | EPDM |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- General Motors: 15556533
- General Motors: 15656617
- NAPA Belts/Hose: 9636
- Motorcraft: KM-3420
- ACDelco: 26275X
- Carquest: 22141
APPLICATIONS:
- 1989-1991 GMC G3500 - Position: Upper
- 1989-1991 Chevrolet G30 - Position: Upper
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
30.7
Centerline Length (Millimeter):
780
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1.25
End 1 Inside Diameter (Millimeter):
32
End 2 Inside Diameter (Inch):
1.5
End 2 Inside Diameter (Millimeter):
38
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
1.6300
Weight - Case (Gross Pounds):
35.2410
Height - Each (Inch):
2.5000
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Height - Case (Inch):
19.3750
Item Level GTIN:
00072053172041
Length - Each (Inch):
21.7500
Quantity Per Application:
1
Length - Case (Inch):
26.3750
Width - Each (Inch):
19.0000
Width - Case (Inch):
12.3750