click to zoom in
Gates 24786 | Upper Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Premium Molded Coolant Hose
- 2020-16 Honda, Pilot, V-6 3.5 L, Upper
- Premium Molded Coolant Hose
- Molded Coolant Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length | 16.84 |
| Centerline Length | 428 |
| Contains Spring | No |
| End 1 Inside Diameter | 1.19 |
| End 1 Inside Diameter | 30 |
| End 2 Inside Diameter | 1.19 |
| End 2 Inside Diameter | 30 |
| Material | EPDM |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Dayco: 72907
- NAPA Belts/Hose: 17444
- ACDelco: 24775L
- Honda: 195015J6A00
- Dayco: E72907
APPLICATIONS:
- 2014-2015 Acura MDX - Position: Upper
- 2017-2019 Honda Ridgeline - Position: Upper
- 2016-2020 Honda Pilot - Position: Upper
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
16.84
Centerline Length (Millimeter):
428
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1.19
End 1 Inside Diameter (Millimeter):
30
End 2 Inside Diameter (Inch):
1.19
End 2 Inside Diameter (Millimeter):
30
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.5800
Height - Each (Inch):
3.0000
Length - Each (Inch):
16.0000
Life Cycle Status Description:
Available Only While Supplies Last
Width - Each (Inch):
4.0000
Item Level GTIN:
00770075715467
Quantity Per Application:
1