×
close
click to zoom in

GM Genuine Parts 10390112 | Brake Dust Shield

(No reviews yet) Write a Review
$7.99
Part Number
ACD10390112
UPC:
707773929711
Condition:
New
5 customers are viewing this product

GM Genuine Parts Brake Dust Shields are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These shields protect your wheels from brake pad dust. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: GM Genuine Parts

FEATURES:

  • Buick;Chevrolet;GMC;Saturn
  • dust-shield;brake-shield;wheel-hub-shield;rotor-shield;brake-rotor-shield;brake-dust-sheild;brake-sheild;rotor-sheild
  • Front Brake Dust Shield
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

SPECIFICS:

Center Diameter (in)3.94
Center Diameter (mm)100.2
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)5
Mount Hole Quantity3
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
Weight (lb)0.77

Product type:
Aftermarket
Brand Description:
Front Brake Dust Shield
Mounting Hardware Included:
No
Material:
Steel
Programming Required:
No
Color:
Black
Length (Inch):
8.5
Width (Inch):
12.52
Thickness (Inch):
0.04
Diameter (Inch):
8.5
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 4:
GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 3:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 1:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Weight (lb) (Pound):
0.77
Height (in) (Inch):
5
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Item Level GTIN:
00707773929711
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Length (Millimeter):
215.85
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Width (Millimeter):
318.01
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Thickness (Millimeter):
1
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Mount Hole Quantity:
3
Diameter (Millimeter):
215.85
Center Diameter (in) (Inch):
3.94
Center Diameter (mm) (Millimeter):
100.2
Country of Origin:
United States
Weight - Each (Gross Pounds):
00.77
Height - Each (Inch):
05.00
Length - Each (Inch):
13.00
Width - Each (Inch):
13.00



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top