×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
GM Genuine Parts 171-1168 | Chevrolet Malibu Rear Disc Brake Pad Set
click to zoom in

GM Genuine Parts 171-1168 | Chevrolet Malibu Rear Disc Brake Pad Set

(No reviews yet) Write a Review
$74.79
Part Number
ACD171-1168
UPC:
808709525554
Condition:
New
5 customers are viewing this product

video gallery

Description

GM Genuine Parts Disc Brake Pads are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc Brake Pads are the friction material used in disc brakes that press against the brake rotor to stop the vehicle. This friction-enhancing material is bonded and/or riveted to steel backing plates. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: GM Genuine Parts

FEATURES:

  • brake-pad;brake-shoe;rotors;drum;brake-job;front-brake;rear-brake;cylider;hydraluic;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Chevrolet
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Integrally molded - friction material molded to backing plate for bond integrity
  • Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
  • Rear Disc Brake Pad Set with Clips
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

SPECIFICS:

Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)5.25
Length (in)7.75
Original Equipment ReplacementYes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
Weight (lb)1.43
Width (in)5.25

Attributes
Product type:
Aftermarket
Product Description:
Rear Disc Brake Pad Set with Clips
Backing Material:
Steel
Pad Wear Sensor Included:
Yes
Friction Material Attachment:
Bonded
Grade Type:
Regular
Friction Material Composition:
Ceramic
Chamfered Edges:
No
Mounting Hardware Included:
Yes
Slotted:
No
Abutment Clips Included:
Yes
Pad Wear Sensor Type:
Mechanical
Pad Shims Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features & Benefits - Bullet 4:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 3:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 1:
Integrally molded - friction material molded to backing plate for bond integrity
Weight (lb) (Pound):
1.43
Height (in) (Inch):
5.25
Life Cycle Status:
Superseded
Width (in) (Inch):
5.25
Life Cycle Status Description:
Superseded - Part is being replaced by the surviving part number.
Length (in) (Inch):
7.75
Item Level GTIN:
00808709525554
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Features & Benefits - Bullet 6:
GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 5:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Original Equipment Replacement:
Yes
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Outer Pad Friction Material Thickness (Inch):
0.39
Inner Pad Friction Material Thickness (Inch):
0.39
Outer Pad Friction Material Thickness (Millimeter):
10
Inner Pad Friction Material Thickness (Millimeter):
10
Prepared For Pad Wear Sensor:
Yes
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
01.43
Height - Each (Inch):
03.19
Length - Each (Inch):
09.75
Width - Each (Inch):
06.62



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top