×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
GM Genuine Parts 171-1220 | Disc Brake Pad Set
click to zoom in

GM Genuine Parts 171-1220 | Disc Brake Pad Set

(No reviews yet) Write a Review
$124.99
Part Number
ACD171-1220
UPC:
808709769378
Condition:
New
5 customers are viewing this product

video gallery

Description

GM Genuine Parts Disc Brake Pads are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc Brake Pads are the friction material used in disc brakes that press against the brake rotor to stop the vehicle. This friction-enhancing material is bonded and/or riveted to steel backing plates. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: GM Genuine Parts

FEATURES:

  • brake-pad;brake-shoe;rotors;drum;brake-job;front-brake;rear-brake;cylider;hydraluic;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Chevrolet;Chevrolet;GMC;GMC
  • Front Brake Pad Set
  • Front Disc Brake Pad Set with Clips and Lubricant
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Integrally molded - friction material molded to backing plate for bond integrity
  • Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

SPECIFICS:

Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)2.8
Length (in)8.6
Package IncludesPads and Springs
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
Weight (lb)7.3
Width (in)3.6

Attributes
Product type:
Aftermarket
Brand Description:
Front Brake Pad Set
Product Description:
Front Disc Brake Pad Set with Clips and Lubricant
Pad Wear Sensor Included:
Yes
Friction Material Attachment:
Bonded
Grade Type:
Regular
Package Includes:
Pads and Springs
Mounting Hardware Included:
Yes
Pad Shims Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features & Benefits - Bullet 4:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 3:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 1:
Integrally molded - friction material molded to backing plate for bond integrity
Weight (lb) (Pound):
7.3
Height (in) (Inch):
2.8
Width (in) (Inch):
3.6
Length (in) (Inch):
8.6
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Features & Benefits - Bullet 6:
GM regularly updates production and service part designs to integrate new materials and technologies
Life Cycle Status:
Superseded
Features & Benefits - Bullet 5:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Life Cycle Status Description:
Superseded - Part is being replaced by the surviving part number.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Item Level GTIN:
00808709769378
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Outer Pad Friction Material Thickness (Inch):
0.485
Inner Pad Friction Material Thickness (Inch):
0.485
Outer Pad Friction Material Thickness (Millimeter):
12.32
Inner Pad Friction Material Thickness (Millimeter):
12.32
Country of Origin:
United States
Weight - Each (Gross Pounds):
07.30
Height - Each (Inch):
03.38
Length - Each (Inch):
09.19
Width - Each (Inch):
05.19



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top