×
close
click to zoom in

GM Genuine Parts 172-2568 | Disc Brake Caliper

(No reviews yet) Write a Review
$259.43
Part Number
ACD172-2568
UPC:
808709372622
Condition:
New
5 customers are viewing this product

GM Genuine Parts Disc Brake Calipers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Calipers are hydraulic components mounted over the brake rotor. The caliper acts as a clamp to press the brake pads against the brake rotor when the brakes are applied. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: GM Genuine Parts

FEATURES:

  • Cadillac;Saab
  • caliper;loaded-caliper;brake-caliper;break-claiper;brake-job;front-brake;rear-brake;cylider;hydraluic;calipar;callypor;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Front Passenger Side Brake Caliper
  • Front Passenger Side Disc Brake Caliper Assembly
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

SPECIFICS:

Casting MaterialCast Iron
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)3.8
Length (in)9
Mount Hole Diameter (in)0.39 in
Mount Hole Diameter (mm)10 mm
Piston 1 Diameter (in)1.89
Piston 1 Diameter (mm)48
Piston 2 Diameter (in)1.89
Piston 2 Diameter (mm)48
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Brake pedal pulsation (not to be confused with normal ABS operation).
Weight (lb)11.92
Width (in)6.1

Product type:
Aftermarket
Brand Description:
Front Passenger Side Brake Caliper
Product Description:
Front Passenger Side Disc Brake Caliper Assembly
Pad Wear Sensor Included:
No
Grade Type:
Regular
Mounting Hardware Included:
No
Programming Required:
No
Mounting Bracket Included:
No
Inlet Fitting Type:
Straight
Caliper Slides Included:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 4:
GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 3:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 1:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Weight (lb) (Pound):
11.92
Height (in) (Inch):
3.8
Width (in) (Inch):
6.1
Length (in) (Inch):
9
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Item Level GTIN:
00808709372622
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Mount Hole Diameter (in):
0.39 in
Mount Hole Diameter (mm):
10 mm
Casting Material:
Cast Iron
Inlet Thread Diameter (Inch):
0.31
Piston Quantity:
2
Piston 1 Diameter (in) (Inch):
1.89
Inlet Thread Diameter (Millimeter):
8
Piston 1 Diameter (mm) (Millimeter):
48
Caliper Type:
Floating
Pads Included:
No
Piston 2 Diameter (in) (Inch):
1.89
Piston 2 Diameter (mm) (Millimeter):
48
Piston Material:
Phenolic
Bleeder Screw Thread Diameter (Inch):
10
Country of Origin:
United States
Weight - Each (Gross Pounds):
11.92
Height - Each (Inch):
08.00
Length - Each (Inch):
11.38
Width - Each (Inch):
08.12



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top