×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
GM Genuine Parts 19420798 | Brake Master Cylinder
click to zoom in

GM Genuine Parts 19420798 | Brake Master Cylinder

(No reviews yet) Write a Review
$126.89
Part Number
ACD19420798
UPC:
193468891409
Condition:
New
5 customers are viewing this product

video gallery

Description

GM Genuine Parts Brake Master Cylinders are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These brake master cylinders are a hydraulic pump mounted to the brake booster and contains a reservoir that holds brake fluid. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: GM Genuine Parts

FEATURES:

  • Brake Master Cylinder
  • brake-master-cylinder;master;master-cylinder;brake-booster;brakebooster;abs;abs-module;anti-lock-brakes;hydroboost;vacuum;vacuum-assist;hydro-boost
  • Cadillac;Chevrolet;GMC
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
  • Pressure tested to ensure safe and confident braking
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

SPECIFICS:

Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 10Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 1 - Bullet 11Parking brake adjustments (as needed).
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Bullet 7The following should be conducted by a qualified technician:
Good Maintenance Practices - Section 1 - Bullet 8Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 1 - Bullet 9Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Height (in)4.4
Length (in)13.6
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2A low or sinking brake pedal.
Weight (lb)2.1
Width (in)6.15

Attributes
Product type:
Aftermarket
Brand Description:
Brake Master Cylinder
Mounting Hardware Included:
No
Mounting Bracket Included:
No
Mounting Hole Quantity:
2
Port Quantity:
2
Gasket Or Seal Included:
Yes
Dust Boot Included:
No
Reservoir Included:
Yes
Sensor Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
Features & Benefits - Bullet 4:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 3:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 1:
Pressure tested to ensure safe and confident braking
Weight (lb) (Pound):
2.1
Height (in) (Inch):
4.4
Width (in) (Inch):
6.15
Length (in) (Inch):
13.6
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Life Cycle Status:
Superseded
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Life Cycle Status Description:
Superseded - Part is being replaced by the surviving part number.
Features & Benefits - Bullet 6:
GM regularly updates production and service part designs to integrate new materials and technologies
Item Level GTIN:
00193468891409
Features & Benefits - Bullet 5:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Bullet 7:
The following should be conducted by a qualified technician:
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 1 - Bullet 8:
Inspection of the brake hoses for brittleness or cracking.
Bleeder Screw Included:
No
Good Maintenance Practices - Section 1 - Bullet 9:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 1 - Bullet 10:
Inspection of wheel bearings and grease seals.
Piston Quantity:
2
Master Cylinder Cap Included:
Yes
Brake Booster Included:
No
Bleeder Hoses Included:
No
Primary Outlet Thread Diameter (Inch):
0.43
Master Cylinder Bore Diameter (Inch):
1.25
Secondary Outlet Thread Diameter (Inch):
0.43
Primary Outlet Thread Diameter (Millimeter):
10.92
Secondary Outlet Thread Diameter (Millimeter):
10.92
Master Cylinder Bore Diameter (Millimeter):
31.81
Reservoir Material:
Plastic
Reservoir Type:
Single
Bore Type:
Stepped
Good Maintenance Practices - Section 1 - Bullet 11:
Parking brake adjustments (as needed).
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
08.81
Height - Each (Inch):
07.10
Length - Each (Inch):
09.20
Width - Each (Inch):
09.10



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top