×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
GM Genuine Parts 25983762 | Disc Brake Caliper
click to zoom in

GM Genuine Parts 25983762 | Disc Brake Caliper

(No reviews yet) Write a Review
$134.99
Part Number
ACD25983762
UPC:
21625765266
Condition:
New
5 customers are viewing this product

video gallery

Description

GM Genuine Parts Disc Brake Calipers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Calipers are hydraulic components mounted over the brake rotor. The caliper acts as a clamp to press the brake pads against the brake rotor when the brakes are applied. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: GM Genuine Parts

FEATURES:

  • Buick;Cadillac;Chevrolet
  • caliper;loaded-caliper;brake-caliper;break-claiper;brake-job;front-brake;rear-brake;cylider;hydraluic;calipar;callypor;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Front Driver Side Brake Caliper
  • Front Driver Side Disc Brake Caliper Assembly
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

SPECIFICS:

Bleeder Thread Diameter10x1 0
Brake Caliper ManufacturerTRW
Casting MaterialCast Iron
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Mount Hole Diameter (in)254 in
Mount Hole Diameter (mm)10 mm
Piston 1 Diameter (in)1.77
Piston 1 Diameter (mm)44.96
Piston 2 Diameter (in)1.77
Piston 2 Diameter (mm)44.96
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Brake pedal pulsation (not to be confused with normal ABS operation).

Attributes
Product type:
Aftermarket
Brand Description:
Front Driver Side Brake Caliper
Product Description:
Front Driver Side Disc Brake Caliper Assembly
Pad Wear Sensor Included:
No
Grade Type:
Regular
Mounting Hardware Included:
No
Programming Required:
No
Mounting Bracket Included:
No
Inlet Fitting Type:
Straight
Caliper Slides Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 4:
GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 3:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 1:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Item Level GTIN:
00021625765266
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Mount Hole Diameter (in):
254 in
Mount Hole Diameter (mm):
10 mm
Casting Material:
Cast Iron
Inlet Thread Diameter (Inch):
0.39
Piston Quantity:
2
Piston 1 Diameter (in) (Inch):
1.77
Inlet Thread Diameter (Millimeter):
10
Piston 1 Diameter (mm) (Millimeter):
44.96
Caliper Type:
Floating
Bleeder Thread Diameter:
10x1 0
Caliper Color:
Black
Pads Included:
No
Piston 2 Diameter (in) (Inch):
1.77
Piston 2 Diameter (mm) (Millimeter):
44.96
Brake Caliper Manufacturer:
TRW
Piston Material:
Steel
Country of Origin:
United States
Weight - Each (Gross Pounds):
09.35
Height - Each (Inch):
05.62
Length - Each (Inch):
10.88
Width - Each (Inch):
07.75



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top