×
close
click to zoom in

Holley 300-132 | Upper Engine Intake Manifold

(No reviews yet) Write a Review
$385.95
Part Number
HOL300-132
UPC:
90127687734
Condition:
New
5 customers are viewing this product

The Modular Mid–Rise intake utilizes the popular Holley LS1/LS2/LS6 cathedral port Mid–Rise 2 x 4 intake Manifold along with a purpose built plenum base Adapter and a Holley 92MM EFI plenum top which converts it into a Mid–Rise EFI intake manifold. With a max overall height of only 10.44in., the Mid–Rise Manifold is an excellent choice for street and performance street/strip applications with a powerband from 1,500–6,500 RPM and limited hood clearance. It's perfect for a blow–thru or turbocharged application. Being part of the Holley modular intake line means that this intake is not only available as a complete kit with intake, adapter, 92MM top and fuel rails, but all parts can also be purchased separately for a custom intake build. The plenum Adapter (PN 300–231) will accept all of the popular Holley Hi–Ram plenum tops as a foundation for custom induction systems.

BRAND: Holley

FEATURES:

  • LS Single Plane Mid-Rise Intake; Carbureted; Single Plane; w/Cathedral Port Cylinder Heads; Front/Rear Height 4.95 in.; RPM Power Band 2500-7000; Satin Finish;
  • Holley Performance Emission Code 3: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles: 1965 and older U.S. manufactured California Certified vehicles/1967 and older U.S. manufactured Federally Certified vehicles/1967 and older Foreign manufactured vehicle. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle
  • Carbureted Single plane intake manifold. Fits all GM LS Gen III or IV engines equipped with LS1/LS2/LS6 style cathedral port cylinder heads
  • 2500-7000 rpm Power Band
  • Manifold For Centrifugal Blower/Turbocharged/NOS Power Adder Apps
  • Weight 11.5 lbs..
  • Efficient Casting Design/Lightweight Wall Thickness
  • LS Single Plane Mid-Rise Intake
  • Minimum Carb Flange Height Results Minimum Hood Modifications
  • Optimized Runner Layout Provide A Broad Torque Curve
  • Incl. Viton O-Ring Intake To Cylinder Head Gaskets
  • Port Size 2.50 in. Height X 1.15 in. Wide
  • Single Plane Intake Manifolds

SPECIFICS:

BarrelFour
ConstructionCast
Cylinder Head TypeCathedral Port
EmissionWithout EGR
Engine Make/SizeGM LS1/LS2/LS6
FinishSatin
Flange Type4150 Square Bore
Front Height4.950 in.
Fuel System TypeCarb
Manifold TypeSingle Plane
Number of CarbsOne
PositionUpper
Rear Height4.950 in.
RPM Range2500-7000
UsageStreet/Hi-Performance
WARNING CA Proposition 65No

Carbureted; Single Plane; w/Cathedral Port Cylinder Heads/Rear Height 4.95 in.; RPM Power Band 2500-7000; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use

DOWNLOADS:

APPLICATIONS:

  • 2004-2005 Cadillac CTS - Position: Upper
  • 1998-2002 Chevrolet Camaro - Position: Upper
  • 1997-2007 Chevrolet Corvette - Position: Upper

Product type:
Aftermarket
Features and Benefits:
Carbureted single plane intake manifold. Fits all GM LS Gen III or IV engines equipped with LS1/LS2/LS6 style cathedral port cylinder heads
Features and Benefits:
2500-7000 rpm Power Band
Features and Benefits:
Incl. Viton O-Ring Intake To Cylinder Head Gaskets
Features and Benefits:
Optimized Runner Layout Provide A Broad Torque Curve
Features and Benefits:
Minimum Carb Flange Height Results Minimum Hood Modifications
Features and Benefits:
Manifold For Centrifugal Blower/Turbocharged/NOS Power Adder Apps
Features and Benefits:
Efficient Casting Design/Lightweight Wall Thickness
Features and Benefits:
Weight 11.5 lbs..
Features and Benefits:
Port Size 2.50 in. Height X 1.15 in. Wide
Brand Description:
LS Single Plane Mid-Rise Intake
Product Description:
LS Single Plane Mid-Rise Intake; Upper; Carbureted; Single Plane; w/Cathedral Port Cylinder Heads; Front/Rear Height 4.95 in.; RPM Power Band 2500-7000; Satin Finish;
Fuel System Type:
Carb
WARNING CA Proposition 65:
No
Finish:
Satin
Barrel:
Four
Emission:
Without EGR
Usage:
Street/Hi-Performance
Construction:
Cast
Cylinder Head Type:
Cathedral Port
Engine Make/Size:
GM LS1/LS2/LS6
Manifold Type:
Single Plane
Number of Carbs:
One
Position:
Upper
RPM Range:
2500-7000
Flange Type:
4150 Square Bore
Front Height:
4.950 in.
Rear Height:
4.950 in.
Short Description:
Intake Manifold
Hazardous Material:
No
Minimum Order Quantity:
1
Life Cycle Status:
Available to Order
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Item Level GTIN:
00090127687734
Quantity Per Application:
1
Weight - Each (Gross Pounds):
12.1000
Height - Each (Inch):
7.0000
Length - Each (Inch):
23.2000
Width - Each (Inch):
14.7000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top