×
close

Hooker 2105-1HKR | Exhaust Header

(No reviews yet) Write a Review
$977.95
Part Number
HOK2105-1HKR
UPC:
90127688489
Condition:
New
5 customers are viewing this product

With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10 percent better. That commitment to excellence has made Hooker Headers the winningest header manufacturer in automotice drag racing history.

BRAND: Hooker

FEATURES:

  • Leak-Free Seal
  • HEADER; 67-69 GM F-BODY; SB CHEVY; 1-3/4
  • Bolt-In Installation
  • Long Tube Header
  • Long Tube Header; Silver Ceramic; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;
  • Long Taper Collectors For Smooth Exhaust Flow Transition
  • Long Tube Geometry Designed For Max Ground Clearance
  • Holley Performance Emission Code 4: This part is legal for sale or use on Racing Use Only Vehicles. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
  • Laser Cut Flanges TIG Welded And Flat Finished
  • O2 Bungs Included

SPECIFICS:

ApplicationAutomotive
Collector Diameter3.000 in.
Collector Tube Size3.000 in.
Engine Make/SizeChevy Small Block
FinishSilver Metallic Ceramic
FinishSilver Ceramic
Flange Length0.375 in.
Head StyleLong-Tube
MaterialStainless Steel
Port ShapeSame As Port/Can Be Matched
Primary Tube Diameter1.750 in.
Tube Diameter1.750 in.
Tube DirectionDown Swept
Tube MaterialMild Steel
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: Cancer and Reproductive Harm - www.P65Warning.ca.gov

DOWNLOADS:

APPLICATIONS:

  • 1971-1972 Pontiac Ventura
    • Silver Ceramic; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
  • 1967-1969 Chevrolet Camaro
    • Silver Ceramic; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Factory Location Engine w/OE Matched Frame Stand/Mount~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Not Compatible w/Aftermarket/Custom Linkage Or Cable Drive Set-Up~Not Compatible w/Stock Manual Trans Reverse Lock-Out Linkage
  • 1968-1972 Oldsmobile Cutlass
    • Silver Ceramic; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
  • 1969-1972 Chevrolet Nova
    • Silver Ceramic; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Fits w/Factory Location Engine w/OE Matched Frame Stand/Mount~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Not Compatible w/Aftermarket/Custom Linkage Or Cable Drive Set-Up~Not Compatible w/Stock Manual Trans Reverse Lock-Out Linkage
  • 1968-1968 Chevrolet Chevy II
    • Silver Ceramic; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
  • 1968-1970 Pontiac LeMans
    • Silver Ceramic; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
  • 1968-1972 Buick Skylark
    • Silver Ceramic; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty

Product type:
Aftermarket
Features and Benefits:
Hooker Headers announces the release of their new long tube headers for the classic 1967-1969 F-Body (Camaro/Firebird) and 1968-1972 X-Body vehicles (Nova, Omega, Ventura, Apollo). These headers bring modern features and fitment to these classic plat
Features and Benefits:
Long Taper Collectors For Smooth Exhaust Flow Transition
Features and Benefits:
Laser Cut Flanges TIG Welded And Flat Finished
Features and Benefits:
Leak-Free Seal
Features and Benefits:
O2 Bungs Included
Features and Benefits:
Bolt-In Installation
Features and Benefits:
Long Tube Geometry Designed For Max Ground Clearance
California Proposition 65:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Brand Description:
Long Tube Header
Product Description:
Long Tube Header; Silver Ceramic; Tube 1.75 in. OD; Collector Size 3 in. OD x 10 in. L; Port Shape Same As Port;
Tube Diameter:
1.750 in.
Tube Material:
Mild Steel
WARNING CA Proposition 65:
Yes
Application:
Automotive
Coated Finish:
Silver Ceramic
Collector Diameter:
3.000 in.
Collector Tube Size:
3.000 in.
Engine Make/Size:
Chevy Small Block
Finish:
Silver Metallic Ceramic
Head Style:
Long-Tube
Material:
Stainless Steel
Port Shape:
Same As Port/Can Be Matched
Primary Tube Diameter:
1.750 in.
Tube Direction:
Down Swept
Flange Length:
0.375 in.
Short Description:
Exhaust Header
Hazardous Material:
No
Minimum Order Quantity:
1
Life Cycle Status:
Available to Order
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Item Level GTIN:
00090127688489
Weight - Each (Gross Pounds):
27.4500
Quantity Per Application:
1
Height - Each (Inch):
14.2000
Length - Each (Inch):
38.3000
Width - Each (Inch):
17.0000

Prop 65 WarningWARNING

This product can expose you to chemicals, including WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.




Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top