×
close

Hooker 2453HKR | Exhaust Header

(No reviews yet) Write a Review
$298.95
Part Number
HOK2453HKR
UPC:
700414008288
Condition:
New
5 customers are viewing this product

With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10 percent better. That commitment to excellence has made Hooker Headers the winningest header manufacturer in automotice drag racing history.

BRAND: Hooker

FEATURES:

  • Holley Performance Emission Code 4: This part is legal for sale or use on Racing Use Only Vehicles. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
  • Best Weld For Durability
  • Designed For Optimal Performance
  • Super Competition Long Tube Header
  • Super Competition Long Tube Header; Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;
  • Long Transition Collector For Decreased Back Pressure
  • Machined Flange Provides Finest Fit
  • HDR 63-74 CHEVY TRUCK 4WD
  • Mandrel Bent Tubing For Smooth Exhaust Flow
  • All Hardware Included
  • Tuned Length Tubes For Max Exhaust Scavenging/Velocity

SPECIFICS:

ApplicationAutomotive
Collector Diameter2.500 in.
Collector Tube Size2.500 in.
Engine Make/SizeChevy Small Block
FinishBlack
FinishBlack Paint
Head StyleLong-Tube
MaterialMild Steel
Port ShapeSame As Port/Can Be Matched
Primary Tube Diameter1.625 in.
Tube Diameter1.625 in.
Tube DirectionDown Swept
Tube MaterialMild Steel
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: Cancer and Reproductive Harm - www.P65Warning.ca.gov

DOWNLOADS:

  • INSTALLATION INSTRUCTIONS
  • APPLICATIONS:

    • 1977-1979 Chevrolet K30
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1968-1974 Chevrolet K30 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1973-1974 GMC K15/K1500 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
    • 1979-1979 GMC K2500
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1987-1987 Chevrolet V30
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1975-1978 GMC K25
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1980-1986 GMC K2500
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1987-1987 Chevrolet V20
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1987-1991 Chevrolet Blazer
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1980-1986 Chevrolet K30
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1971-1971 Chevrolet Blazer
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
    • 1967-1967 GMC K25/K2500 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
    • 1987-1987 GMC V2500
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1969-1969 Chevrolet Blazer
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
    • 1977-1978 GMC K35
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1974-1974 GMC K35/K3500 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
    • 1979-1979 GMC K3500
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1987-1987 GMC V3500
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1973-1974 GMC K25/K2500 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
    • 1980-1986 GMC K3500
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1973-1974 GMC K15/K1500 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1975-1979 Chevrolet K20
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1975-1978 GMC K15
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1980-1986 Chevrolet K20
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1980-1986 Chevrolet K5 Blazer
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1973-1974 Chevrolet K10 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1987-1987 GMC V1500
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1980-1986 Chevrolet K10
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1980-1991 GMC Jimmy
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1973-1973 Chevrolet Blazer
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
    • 1970-1970 GMC C35/C3500 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1975-1979 GMC Jimmy
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1973-1974 Chevrolet K10 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
    • 1968-1974 GMC K35/K3500 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1980-1986 GMC K1500
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1987-1987 Chevrolet V10
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Reducers Available With Oxygen Sensor~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1973-1974 Chevrolet K20 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1979-1979 GMC K1500
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1973-1974 GMC K25/K2500 Pickup
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1975-1979 Chevrolet K5 Blazer
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
    • 1975-1979 Chevrolet K10
      • Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads

    Product type:
    Aftermarket
    Features and Benefits:
    Hooker Competition headers offer the best value in the high performance header market. Designed for the value-conscious buyer, Hooker Competition headers offer premium features at a very competitive price. Made of durable 16 gauge mild steel tubing,
    Features and Benefits:
    Tuned Length Tubes For Max Exhaust Scavenging/Velocity
    Features and Benefits:
    Designed For Optimal Performance
    Features and Benefits:
    Long Transition Collector For Decreased Back Pressure
    Features and Benefits:
    Mandrel Bent Tubing For Smooth Exhaust Flow
    Features and Benefits:
    Machined Flange Provides Finest Fit
    Features and Benefits:
    Best Weld For Durability
    Features and Benefits:
    All Hardware Included
    California Proposition 65:
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
    Brand Description:
    Super Competition Long Tube Header
    Product Description:
    Super Competition Long Tube Header; Black Finish; Tube Size 1.625 in. x 27 in.; Collector Size 2.5 in./Length 8 in.; Port Shape Same As Port;
    Tube Diameter:
    1.625 in.
    Tube Material:
    Mild Steel
    WARNING CA Proposition 65:
    Yes
    Application:
    Automotive
    Coated Finish:
    Black
    Collector Diameter:
    2.500 in.
    Collector Tube Size:
    2.500 in.
    Engine Make/Size:
    Chevy Small Block
    Finish:
    Black Paint
    Head Style:
    Long-Tube
    Material:
    Mild Steel
    Port Shape:
    Same As Port/Can Be Matched
    Primary Tube Diameter:
    1.625 in.
    Tube Direction:
    Down Swept
    Short Description:
    Exhaust Header
    Hazardous Material:
    No
    Minimum Order Quantity:
    1
    Life Cycle Status:
    Available to Order
    Life Cycle Status Description:
    Available to Order - Part is released to customers for ordering.
    Weight - Each (Gross Pounds):
    25.1000
    Item Level GTIN:
    00700414008288
    Height - Each (Inch):
    10.6000
    Quantity Per Application:
    1
    Length - Each (Inch):
    33.5000
    Width - Each (Inch):
    16.6000

    Prop 65 WarningWARNING

    This product can expose you to chemicals, including WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.




    Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
    to top