×
close
click to zoom in

ICON Vehicle Dynamics K53063 | Suspension Lift Kit

(No reviews yet) Write a Review
$3,959.70
Part Number
ICOK53063
UPC:
840103416977
Condition:
New
5 customers are viewing this product

The Stage 3 suspension system for the 2010-UP Toyota 4Runner/2010-2014 FJ Cruiser includes the components found in the Stage 2 system along with an ICON Billet Aluminum Rear Lower Link kit. Extended travel ICON 2.5 Series coilover shocks and a billet aluminum Delta Joint upper control arm kit provide a significant upgrade to the 4Runners front suspension. The rear of the vehicle is improved with our 2" lift coil springs, ICON 2.0 Aluminum Series shocks, and the additional rear lower links. ICON's CNC machined 6061 billet aluminum lower links are much stronger than the OE units, can be easily adjusted on the truck for optimum pinion angle, and are protected by a machined nylon skid strip to help slide over rocks without damage to the links structure. On top of it all, these links have been designed to provide correct roll steer geometry for the best possible handling on and off-road.This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

BRAND: ICON Vehicle Dynamics

FEATURES:

  • APPLICATION NOTE #102: KDSS EQUIPPED REQUIRE REAR TRACK BAR 54200
  • APPLICATION NOTE #47: 700LB/IN EXPEDITION COIL AVAILABLE FOR HEAVIER EQUIPPED VEHICLES
  • APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE
  • 10-UP FJ/10-UP 4RUNNER 0-3.5" STAGE 3 SUSPENSION SYSTEM W BILLET UCA
  • 2010-UP 4RUNNER/2010-2014 FJ CRUISER 0-3.5" LIFT STAGE 3 SUSPENSION SYSTEM WITH BILLET UCA
  • 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
  • Corrosion resistant CAD plated coilover shock body with 7/8" shaft
  • 4RUNNER/FJ STAGE 3 SUSP SYS W BILLET UCA
  • 10-UP FJ/10-UP 4RUNNER 0-3.5" STAGE 3 SUSPENSION SYSTEM W BILLET UCA
  • APPLICATION NOTE #46: SUSPENSION SYSTEM COMPATIBLE WITH KDSS. FRONT SWAY BAR RELOCATION BRACKETS NOT USED FOR KDSS EQUIPPED VEHICLES. CERTAIN YEARS REQUIRE TRIMMING FOR FRONT RESERVOIR BRACKET FITMENT
  • OEM Wheels & Tires Fitment: Yes
  • Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
  • Adjustable coilovers provide 0-3.5" of front lift height
  • Billet Aluminum rear lower links offer on vehicle pinion angle adjustment
  • Extended Travel coilovers matched with ICON UCA provides increased front droop travel
  • Increased wheel travel and ride quality over stock
  • Recommended Aftermarket Wheels: ICON Alloys | 17x8.5 with 4.75 Backspace / 0mm Offset
  • Bolt-on system means no cutting or welding necessary for install
  • Vehicle specific tuned front and rear shocks for superior shock damping and control
  • Ships in multiple boxes
  • Suspension Lift Kit
  • 6061 aircraft grade aluminum CNC machined components
  • FK Rod End bearings for extended longevity and minimal deflection

SPECIFICS:

Add-On Part198000 - 2 PIN COILOVER SPANNER WRENCH KIT
Bushings IncludedYes
California Proposition 65WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Coils Quantity Front2
Coils Quantity Rear2
Grade TypePerformance
Maximum Lift3.5
Mounting Hardware IncludedYes
Shocks IncludedYes
Spring ColorBlack
Spring MaterialSteel
Spring Rate650
Title10-UP FJ/10-UP 4RUNNER 0-3.5" STAGE 3 SUSPENSION SYSTEM W BILLET UCA

DOWNLOADS:

Product type:
Aftermarket
Features and Benefits:
This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the
Features and Benefits:
The Stage 3 suspension system for the 2010-UP Toyota 4Runner/2010-2014 FJ Cruiser includes the components found in the Stage 2 system along with an ICON Billet Aluminum Rear Lower Link kit. Extended travel ICON 2.5 Series coilover shocks and a billet
Features and Benefits:
Bolt-on system means no cutting or welding necessary for install
Features and Benefits:
2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
Features and Benefits:
FK Rod End bearings for extended longevity and minimal deflection
Features and Benefits:
Corrosion resistant CAD plated coilover shock body with 7/8" shaft
Features and Benefits:
6061 aircraft grade aluminum CNC machined components
Features and Benefits:
Billet Aluminum rear lower links offer on vehicle pinion angle adjustment
Features and Benefits:
Extended Travel coilovers matched with ICON UCA provides increased front droop travel
Features and Benefits:
Adjustable coilovers provide 0-3.5" of front lift height
Features and Benefits:
Vehicle specific tuned front and rear shocks for superior shock damping and control
Features and Benefits:
Increased wheel travel and ride quality over stock
Brand Description:
10-UP FJ/10-UP 4RUNNER 0-3.5" STAGE 3 SUSPENSION SYSTEM W BILLET UCA
Product Description:
2010-UP 4RUNNER/2010-2014 FJ CRUISER 0-3.5" LIFT STAGE 3 SUSPENSION SYSTEM WITH BILLET UCA
Associated Comment:
OEM Wheels & Tires Fitment: Yes
Associated Comment:
Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 4.75” Backspace / 0mm Offset
Associated Comment:
Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.00” Backspace / 0mm Offset
Associated Comment:
Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.00” Backspace / 0mm Offset
Associated Comment:
Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
Associated Comment:
APPLICATION NOTE #46: SUSPENSION SYSTEM COMPATIBLE WITH KDSS. FRONT SWAY BAR RELOCATION BRACKETS NOT USED FOR KDSS EQUIPPED VEHICLES. CERTAIN YEARS REQUIRE TRIMMING FOR FRONT RESERVOIR BRACKET FITMENT
Associated Comment:
APPLICATION NOTE #47: 700LB/IN EXPEDITION COIL AVAILABLE FOR HEAVIER EQUIPPED VEHICLES
Associated Comment:
APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE
Associated Comment:
APPLICATION NOTE #102: KDSS EQUIPPED REQUIRE REAR TRACK BAR 54200
Associated Comment:
Ships in multiple boxes
Bushings Included:
Yes
Grade Type:
Performance
Mounting Hardware Included:
Yes
Spring Color:
Black
Spring Material:
Steel
Coils Quantity Front:
2
Maximum Lift (Inch):
3.5
Shocks Included:
Yes
Spring Rate (Pounds Per Inch):
650
Coils Quantity Rear:
2
Short Description:
SUSPENSION SYSTEM
Hazardous Material:
No
Minimum Order Quantity:
1
Country of Origin:
United States
Weight - Box (Gross Pounds):
121.0000
Life Cycle Status:
Available To Order
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Item Level GTIN:
00840103416977
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top