×
close
click to zoom in

Gates 24089 | Jeep Wrangler Upper Radiator Coolant Hose

(No reviews yet) Write a Review
$16.99
Part Number
GAT24089
UPC:
770075574606
Condition:
New
5 customers are viewing this product

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

  • Recommend for upper, lower, by-pass, heater and other coolant hose applications.
  • Heat and ozone resistant cover.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
  • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.

Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Molded Coolant Hose
  • Premium Molded Coolant Hose
  • 1995-1987 Jeep, Wrangler, 4-Cyl. 2.5 L, Upper
  • Premium Molded Coolant Hose

SPECIFICS:

Branch Quantity0
Centerline Length20.1
Centerline Length511
End 1 Inside Diameter1.25
End 1 Inside Diameter32
End 2 Inside Diameter37
End 2 Inside Diameter1.46
MaterialEPDM
Modular HoseNo
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • Carquest: 24089
  • NAPA Belts/Hose: 16725
  • Chrysler: 52003911
  • ACDelco: 22759L

APPLICATIONS:

  • 1987-1995 Jeep Wrangler - Position: Upper

Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' m
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
20.1
Centerline Length (Millimeter):
511
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1.25
End 1 Inside Diameter (Millimeter):
32
End 2 Inside Diameter (Inch):
1.46
End 2 Inside Diameter (Millimeter):
37
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.7600
Weight - Case (Gross Pounds):
173.0200
Height - Each (Inch):
2.0000
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Height - Case (Inch):
27.0600
Item Level GTIN:
00770075574606
Length - Each (Inch):
17.0000
Quantity Per Application:
1
Length - Case (Inch):
43.9050
Width - Each (Inch):
6.0000
Width - Case (Inch):
35.4050



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top