×
close
click to zoom in

MagnaFlow 339106 | Catalytic Converter

(No reviews yet) Write a Review
$732.00
Part Number
MAG339106
Condition:
New
5 customers are viewing this product

BRAND:MagnaFlow Exhaust Products

FEATURES:

  • Universal Catalytic Converter - 2.5in.
  • Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
  • Universal Catalytic Converter - 2.5in.
  • MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 339106 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
  • Catalytic Converter
  • Catalytic Converter

SPECIFICS:

Air Tube AdaptableNo
Body Height3.75
Body Length12
Body ShapeOval
Body TypeClam Shell
Body Width6.375
Clamp IncludedNo
Converter Quantity1
FinishStainless Steel
Gasket IncludedNo
Hangers IncludedNo
Heat Shield AttachedYes
Heat Shield MaterialAluminized Steel
Inlet AttachmentWeld-On
Inlet Diameter2.5
Inlet OrientationStraight
Inlet Quantity1
MaterialStainless Steel
Mounting Hardware IncludedNo
Outlet AttachmentWeld-On
Outlet Diameter2.5
Outlet OrientationStraight
Outlet Quantity1
Overall Length16
Sensor Port Count0
SeriesCalifornia
SubstrateCeramic
SubtitleCalifornia / CARB Compliant
TitleCalifornia Universal
TypeUniversal

APPLICATIONS:

  • 1975-1994 Chevrolet G10
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1991-1992 Isuzu Rodeo
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1980 Dodge B300
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1994 Dodge Ram 2500 - Position: Left
    • Certification Level : PRE-OBDII OE Spec without Air Tube Cutting and Welding Required During Installation
  • 1995-1995 Dodge Ram 2500 - Position: Left
  • 1979-1988 Jeep J20
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1978 GMC K15
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1994 Dodge Ram 3500 - Position: Right
    • Certification Level : PRE-OBDII OE Spec without Air Tube Cutting and Welding Required During Installation
  • 1975-1983 Ford E-150 Econoline Club Wagon
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1991 GMC S15 Jimmy
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1980 Plymouth PB100
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1993 Chevrolet C2500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1980 Dodge B200
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K20
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1979 Ford F-150
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1981-1981 Dodge B250
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1994 GMC G1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1977-1983 Jeep Cherokee
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1992-1992 Oldsmobile Silhouette
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1983 Ford E-150 Econoline
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet R10
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1978 GMC C15
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1993 Chevrolet K2500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1978 GMC G25
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1993 GMC K1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1982 Chevrolet LUV
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1985-1992 GMC Safari
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1992-1992 Chevrolet Lumina APV
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1978-1979 Ford Bronco
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K5 Blazer
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1986 GMC K1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1990-1993 GMC K2500
    • Certification Level : PRE-OBDII OE Spec To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1975-1981 Dodge Ramcharger
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1982-1987 Dodge W350
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1994 Dodge Ram 3500 - Position: Left
  • 1988-1989 Toyota Van
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1986 GMC K2500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1994 GMC G2500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet C20 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1989-1994 Isuzu Amigo
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1986 GMC C2500 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K10
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet C10 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1984-1993 Isuzu Trooper
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1993 GMC C1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1995 Dodge Ram 3500 - Position: Right
  • 1995-1995 Dodge B3500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1981-1981 Dodge B350
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1987 GMC Jimmy
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1987-1987 GMC V1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1988 Jeep J10
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1982-1987 Dodge D350
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1981-1981 Plymouth PB250
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1995-1995 Dodge Ram 2500 - Position: Right
    • Certification Level : PRE-OBDII OE Spec without Air Tube Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet V10
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1991-1991 GMC Syclone
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1994 Dodge B350
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1978-1994 Chevrolet G30
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1976-1980 Dodge W200
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1977-1983 Jeep Wagoneer
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1976-1983 Jeep CJ7
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1978-1978 GMC G35
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1983 Ford E-250 Econoline Club Wagon
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1987-1987 GMC R1500 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1981-1981 Plymouth PB150
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1994 Chevrolet S10 Blazer
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1995-1995 Dodge B1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1977 Dodge W100
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1991-1993 Plymouth Voyager
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1990-1994 Nissan D21
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1983 Ford E-250 Econoline
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1993 Chevrolet K1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1981 GMC K2500 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1995 Chevrolet S10
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1981-1981 Dodge B150
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1980 Dodge D200
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1986 GMC C1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1993 GMC K2500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1994 Chevrolet G20
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K20 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1980 International Scout II
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1982 Ford E-100 Econoline Club Wagon
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1993 Chevrolet C1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1986 GMC K1500 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet C20
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1993-1995 Jeep Grand Cherokee
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet C10
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1981-1981 Dodge D250
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1980 Plymouth PB300
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1992-1992 Pontiac Trans Sport
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1978 GMC C25
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1994 GMC G3500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1992-1993 GMC Typhoon
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1991-1995 Plymouth Grand Voyager
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet Blazer
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1976-1976 GMC G35
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1976 Chevrolet G30
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1977-1979 Ford F-250
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1992-1995 GMC Jimmy
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1982 Ford E-100 Econoline
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1995 Dodge Dakota
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1995-1995 Dodge B2500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1994 Dodge B150
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1994 Dodge Ram 2500 - Position: Right
  • 1975-1981 Plymouth Trailduster
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1987-1987 GMC R2500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1978 GMC K15 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1981-1994 Isuzu Pickup
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1993 GMC C2500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1978 GMC K25
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1991-1993 Dodge Caravan
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1980 Plymouth PB200
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1987-1987 GMC R1500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1986 GMC C2500
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1991-1994 Oldsmobile Bravada
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1991-1994 GMC Sonoma
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1975 Dodge D300
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1989 GMC S15
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1981-1981 Plymouth PB350
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1991-1995 Dodge Grand Caravan
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1994 Dodge B250
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1976-1978 GMC G15
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1979 Ford F-100
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1983 Jeep CJ5
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K10 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1978-1981 Dodge W150
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1985-1985 Dodge D250
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1988-1988 Dodge W250
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1985-1992 Chevrolet Astro
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1981-1983 Jeep Scrambler
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1975 Dodge W300
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet R10 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1979-1986 GMC C1500 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet R20
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1979 Dodge D100
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1978-1981 Dodge D150
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1979 Dodge B100
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1975-1978 GMC C15 Suburban
    • Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • 1994-1995 Dodge Ram 3500 - Position: Left
    • Certification Level : PRE-OBDII OE Spec without Air Tube Cutting and Welding Required During Installation

Product type:
Aftermarket



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top