×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
MagnaFlow 51006 | Catalytic Converter
click to zoom in

MagnaFlow 51006 | Catalytic Converter

(No reviews yet) Write a Review
$272.00
Part Number
MAG51006
UPC:
841380068972
Condition:
New
5 customers are viewing this product

video gallery

Description

BRAND: MagnaFlow Exhaust Products

FEATURES:

  • Universal Catalytic Converter - 2.50in.
  • Catalytic Converter
  • Universal Catalytic Converter - 2.50in.
  • Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
  • MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
  • Catalytic Converter

SPECIFICS:

Air Tube AdaptableNo
Body Height3.75
Body Length12
Body MaterialStainless Steel
Body ShapeOval
Body TypeClam Shell
Body Width5.625
FinishStainless Steel
Heat Shield AttachedYes
Heat Shield IncludedYes
Heat Shield MaterialAluminized Steel
Inlet AttachmentWeld-On
Inlet Diameter2.5
Inlet OrientationStraight
Inlet Quantity1
MaterialStainless Steel
Outlet AttachmentWeld-On
Outlet Diameter2.5
Outlet OrientationStraight
Outlet Quantity1
Overall Length16
Oxygen Sensor LocationNone
Sensor Port Count0
SeriesOEM Grade
Substrate MaterialCeramic
SubtitleFederal / EPA Compliant
TitleOEM Grade Universal
TypeUniversal

DOWNLOADS:

APPLICATIONS:

  • 2000-2003 Dodge Durango
    • Cutting and Welding Required During Installation
  • 2007-2007 GMC Sierra 1500 - Position: Right
    • Federal Emissions Equipped Federal Emissions Equipped (Tier 1) Cutting and Welding Required During Installation
  • 2002-2003 Chevrolet Avalanche 1500 - Position: Left
    • Cutting and Welding Required During Installation
  • 2000-2001 GMC Yukon - Position: Left
    • Cutting and Welding Required During Installation
  • 2009-2010 GMC Yukon - Position: Right
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2000-2000 Nissan Xterra
    • Cutting and Welding Required During Installation
  • 2003-2005 Lincoln Aviator - Position: Rear
    • Cutting and Welding Required During Installation
  • 2009-2009 Cadillac Escalade - Position: Left
  • 2007-2007 Chevrolet Avalanche - Position: Right
  • 2009-2009 Cadillac Escalade - Position: Right
    • Cutting and Welding Required During Installation
  • 1996-2000 Chevrolet Express 2500 - Position: Right
  • 1998-2003 Mazda B4000 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2002-2006 Cadillac Escalade - Position: Right
    • Cutting and Welding Required During Installation
  • 2000-2004 GMC Savana 1500
    • Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Tahoe - Position: Left
    • Cutting and Welding Required During Installation
  • 2009-2010 GMC Yukon XL 1500 - Position: Left
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2001-2005 Chevrolet Blazer - Position: Rear
    • Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Avalanche - Position: Left
  • 1996-2000 Chevrolet Express 3500 - Position: Left
    • Cutting and Welding Required During Installation
  • 2008-2008 Chevrolet Avalanche
    • Cutting and Welding Required During Installation
  • 2007-2009 Nissan Titan - Position: Left
  • 2002-2006 Ford F-150 - Position: Rear Right
  • 2001-2006 Lexus LS430 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2003-2003 Mazda B3000 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Silverado 1500 - Position: Left
    • Federal Emissions Equipped Federal Emissions Equipped (Tier 1) Cutting and Welding Required During Installation
  • 1999-2000 Ford Explorer - Position: Front
    • Cutting and Welding Required During Installation
  • 1996-1996 Chevrolet Express 1500 - Position: Right
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 2001-2004 Nissan Frontier - Position: Rear
    • Cutting and Welding Required During Installation
  • 2003-2005 GMC Savana 2500
    • Cutting and Welding Required During Installation
  • 1998-2000 Nissan Frontier
    • Cutting and Welding Required During Installation
  • 2003-2004 Lincoln Navigator - Position: Rear
    • Cutting and Welding Required During Installation
  • 2002-2005 Mercury Mountaineer - Position: Rear
    • Cutting and Welding Required During Installation
  • 2004-2005 Chevrolet Colorado - Position: Rear
    • with Sport Chassis Cutting and Welding Required During Installation
  • 2001-2002 Toyota 4Runner - Position: Rear
    • Cutting and Welding Required During Installation
  • 2000-2000 Jeep Cherokee - Position: Rear
    • Cutting and Welding Required During Installation Split Date From: From 1/20/2000
  • 2009-2009 Chevrolet Avalanche - Position: Right
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1996-1996 Chevrolet Express 2500 - Position: Left
    • Over 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1996-2000 Chevrolet Express 3500 - Position: Right
  • 2007-2009 Nissan Titan - Position: Right
    • Cutting and Welding Required During Installation
  • 2001-2001 Lincoln Navigator - Position: Rear Right
    • Cutting and Welding Required During Installation
  • 2009-2011 Chevrolet Traverse - Position: Rear
    • Underbody Cutting and Welding Required During Installation
  • 2007-2008 Isuzu i-290 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2003-2010 GMC Yukon - Position: Right
  • 2007-2007 Chevrolet Suburban 1500
  • 2002-2006 Ford F-150 - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 2004-2009 GMC Yukon XL 1500 - Position: Left
  • 2002-2009 GMC Envoy
    • Cutting and Welding Required During Installation
  • 2002-2006 Cadillac Escalade - Position: Left
  • 2001-2007 Lexus GS430 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2000-2003 Dodge Dakota
  • 2002-2002 Lincoln Blackwood - Position: Right
    • Cutting and Welding Required During Installation
  • 1999-2000 Ford Explorer - Position: Rear
  • 2010-2013 Cadillac Escalade - Position: Front
    • Cutting and Welding Required During Installation
  • 2000-2001 GMC Jimmy - Position: Rear
    • Cutting and Welding Required During Installation
  • 2006-2006 GMC Savana 1500 - Position: Left
    • Cutting and Welding Required During Installation
  • 1999-2010 GMC Sierra 1500 - Position: Left
  • 2005-2007 Ford E-250 - Position: Left
    • Cutting and Welding Required During Installation
  • 2005-2005 GMC Savana 1500 - Position: Right
    • Cutting and Welding Required During Installation
  • 2007-2007 Toyota Tundra - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 2009-2010 Saturn Outlook - Position: Rear
    • Underbody Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Silverado 1500 Classic - Position: Left
    • Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Avalanche - Position: Left
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2001-2004 Chevrolet Express 1500
    • Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Silverado 1500 Classic - Position: Left
  • 2002-2010 Lexus SC430 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Silverado 1500 Classic - Position: Right
    • Cutting and Welding Required During Installation
  • 1996-1996 Chevrolet G30 - Position: Left
    • Cutting and Welding Required During Installation
  • 2000-2002 GMC Yukon XL 1500 - Position: Right
    • Cutting and Welding Required During Installation
  • 1999-2008 Chevrolet Silverado 1500 - Position: Right
    • Cutting and Welding Required During Installation
  • 2002-2005 Ford Explorer - Position: Rear
    • Cutting and Welding Required During Installation
  • 2007-2007 GMC Sierra 1500
  • 1997-2000 Chevrolet Express 2500 - Position: Left
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 2002-2002 Ford Ranger - Position: Rear Forward
    • Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Silverado 1500 - Position: Right
    • Federal Emissions Equipped (Tier 1) Cutting and Welding Required During Installation
  • 2006-2006 Chevrolet Express 1500 - Position: Left
    • Cutting and Welding Required During Installation
  • 2007-2009 GMC Yukon - Position: Left
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1997-1999 Chevrolet Express 1500 - Position: Right
  • 2002-2006 Chevrolet Trailblazer EXT
    • Cutting and Welding Required During Installation
  • 2004-2006 Chevrolet Avalanche 1500 - Position: Right
    • Cutting and Welding Required During Installation
  • 2004-2004 Ford Expedition - Position: Rear Left
  • 2002-2002 Lincoln Blackwood - Position: Left
  • 2002-2005 Cadillac Escalade - Position: Left
    • Cutting and Welding Required During Installation
  • 2000-2003 Dodge Dakota
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2006-2006 Isuzu i-280 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2003-2006 Kia Sorento - Position: Rear
    • Cutting and Welding Required During Installation
  • 2007-2007 GMC Sierra 1500 Classic - Position: Left
    • Cutting and Welding Required During Installation
  • 2001-2001 Ford F-150 - Position: Right
  • 2002-2003 Chevrolet Avalanche 1500 - Position: Right
  • 2011-2011 Chevrolet Silverado 1500 - Position: Left
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Silverado 1500 - Position: Right
  • 2000-2003 Chevrolet S10
    • Cutting and Welding Required During Installation
  • 2011-2011 GMC Yukon - Position: Right
    • Cutting and Welding Required During Installation
  • 2009-2010 GMC Sierra 1500 - Position: Right
  • 2006-2006 GMC Savana 1500 - Position: Right
  • 2005-2007 Ford Freestyle - Position: Rear
    • Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Avalanche - Position: Right
  • 2000-2000 GMC Yukon XL 1500 - Position: Right
  • 2009-2009 Chevrolet Suburban 1500 - Position: Left
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2007-2009 Toyota Tundra - Position: Right
  • 2000-2013 Chevrolet Tahoe - Position: Left
  • 2005-2005 GMC Savana 1500 - Position: Left
  • 2005-2007 Ford E-250 - Position: Right
  • 1999-2000 GMC Sierra 2500 - Position: Left
  • 1999-2000 Chevrolet Silverado 2500
    • Cutting and Welding Required During Installation
  • 2006-2006 Chevrolet Express 1500 - Position: Right
  • 1999-2000 Lincoln Navigator - Position: Left
  • 2004-2005 GMC Envoy XL - Position: Front Right
  • 2012-2013 GMC Yukon - Position: Right
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1999-2003 Lexus RX300 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-1996 Chevrolet G30 - Position: Right
  • 2006-2006 Dodge Ram 1500
    • Solid Front Axle Cutting and Welding Required During Installation
  • 2011-2013 GMC Sierra 1500 - Position: Right
    • Cutting and Welding Required During Installation
  • 2008-2010 Toyota Tundra - Position: Right
    • Cutting and Welding Required During Installation
  • 2000-2010 GMC Yukon - Position: Left
  • 2000-2003 GMC Sonoma
    • Cutting and Welding Required During Installation
  • 2012-2013 Chevrolet Tahoe - Position: Right
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2000-2005 Lexus GS300
    • Cutting and Welding Required During Installation
  • 2005-2005 Chevrolet Express 1500 - Position: Left
  • 2011-2013 GMC Yukon XL 1500 - Position: Right
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2009-2013 Chevrolet Silverado 1500 - Position: Right
  • 2010-2010 Chevrolet Equinox - Position: Rear
  • 2003-2003 Ford Expedition - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 2000-2009 GMC Yukon - Position: Right
    • Cutting and Welding Required During Installation
  • 2002-2005 Cadillac Escalade - Position: Right
  • 2007-2008 Isuzu i-370 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2007-2009 Cadillac Escalade
    • Cutting and Welding Required During Installation
  • 2007-2007 Toyota Tundra - Position: Front Left
  • 2006-2006 Hummer H3 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2009-2011 GMC Acadia - Position: Rear
    • Underbody Cutting and Welding Required During Installation
  • 2007-2009 Chevrolet Colorado - Position: Rear
    • Cutting and Welding Required During Installation
  • 2001-2002 Mazda B3000 - Position: Rear Rearward
    • Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Suburban 1500 - Position: Right
  • 2012-2013 Chevrolet Tahoe - Position: Left
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Avalanche - Position: Left
    • Cutting and Welding Required During Installation
  • 2010-2013 Chevrolet Silverado 1500 - Position: Right
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2001-2002 Mazda B3000 - Position: Rear Forward
  • 2009-2009 Chevrolet Silverado 1500 - Position: Left
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1998-2000 Mazda B3000 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2012-2013 GMC Yukon - Position: Left
  • 1996-1996 GMC G3500 - Position: Right
    • Cutting and Welding Required During Installation
  • 2003-2004 GMC Envoy XL
    • Cutting and Welding Required During Installation
  • 2003-2005 Chevrolet Express 2500
    • Cutting and Welding Required During Installation
  • 2006-2006 Isuzu i-350 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2004-2008 Isuzu Ascender
    • Cutting and Welding Required During Installation
  • 2003-2006 Chevrolet SSR
    • Cutting and Welding Required During Installation
  • 2005-2007 Mercury Montego - Position: Rear
    • Cutting and Welding Required During Installation
  • 2012-2013 Chevrolet Suburban 1500 - Position: Left
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2007-2007 GMC Sierra 1500 - Position: Right
    • Federal Emissions Equipped (Tier 1) Cutting and Welding Required During Installation
  • 1999-2000 Lincoln Navigator - Position: Right
    • Cutting and Welding Required During Installation
  • 2000-2004 Jeep Wrangler
    • Cutting and Welding Required During Installation
  • 2011-2011 Toyota Tundra - Position: Right
  • 2005-2007 Ford E-350 Super Duty - Position: Left
    • Cutting and Welding Required During Installation
  • 2002-2002 Ford Ranger - Position: Rear Rearward
  • 2002-2002 Lincoln Navigator - Position: Right
    • Cutting and Welding Required During Installation
  • 2001-2001 Ford F-150 - Position: Left
    • Cutting and Welding Required During Installation
  • 2007-2009 GMC Canyon - Position: Rear
    • Cutting and Welding Required During Installation
  • 2004-2006 Chevrolet Avalanche 1500 - Position: Left
  • 2007-2013 Toyota Tundra - Position: Left
    • Cutting and Welding Required During Installation
  • 2006-2006 GMC Envoy XL
    • Cutting and Welding Required During Installation
  • 1999-2000 GMC Sierra 2500 - Position: Right
    • Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Tahoe - Position: Right
  • 2001-2001 Lincoln Navigator - Position: Rear Left
  • 1996-1999 GMC Savana 1500 - Position: Right
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 2000-2003 Dodge Dakota
    • Cutting and Welding Required During Installation
  • 2012-2013 Chevrolet Suburban 1500 - Position: Right
  • 2009-2010 GMC Yukon XL 1500 - Position: Right
  • 2002-2002 Lincoln Navigator - Position: Left
  • 2004-2005 GMC Envoy XL - Position: Front Left
    • Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Silverado 1500 Classic - Position: Right
  • 1996-2000 GMC Savana 3500 - Position: Right
    • Cutting and Welding Required During Installation
  • 1997-1999 Chevrolet Express 1500 - Position: Left
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 2006-2007 Volkswagen Jetta
    • Cutting and Welding Required During Installation
  • 1999-2008 GMC Sierra 1500 - Position: Right
    • Cutting and Welding Required During Installation
  • 1999-2013 Chevrolet Silverado 1500 - Position: Left
  • 2007-2007 Chevrolet Avalanche
  • 1999-2001 Jeep Grand Cherokee - Position: Rear
    • Cutting and Welding Required During Installation
  • 2005-2007 Ford E-350 Super Duty - Position: Right
  • 2007-2007 GMC Sierra 1500 Classic - Position: Right
  • 2002-2003 Dodge Ram 1500 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2003-2003 Ford Expedition - Position: Rear Right
  • 2006-2006 Volkswagen GTI - Position: Rear
    • Cutting and Welding Required During Installation
  • 2007-2007 Toyota Tundra - Position: Front Right
    • Cutting and Welding Required During Installation
  • 2007-2008 Volkswagen GTI
    • Cutting and Welding Required During Installation
  • 2012-2013 Chevrolet Tahoe - Position: Right
  • 2000-2008 Chevrolet Suburban 1500 - Position: Right
    • Cutting and Welding Required During Installation
  • 2011-2013 GMC Yukon XL 1500 - Position: Left
  • 2000-2004 Ford Focus
    • Cutting and Welding Required During Installation
  • 2000-2000 Chevrolet Express 1500 - Position: Right
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 2004-2004 Ford Expedition - Position: Rear Right
    • Cutting and Welding Required During Installation
  • 2000-2011 Chevrolet Suburban 1500 - Position: Left
  • 2004-2007 Buick Rainier
    • Cutting and Welding Required During Installation
  • 2000-2001 GMC Yukon - Position: Right
  • 2000-2003 Jeep Wrangler - Position: Rear
    • Cutting and Welding Required During Installation
  • 2001-2004 Nissan Xterra - Position: Rear
    • Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Tahoe - Position: Left
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2002-2003 Dodge Ram 1500
    • Cutting and Welding Required During Installation
  • 2012-2013 GMC Yukon - Position: Right
  • 2000-2000 GMC Savana 3500 - Position: Left
  • 2010-2013 Chevrolet Avalanche - Position: Right
    • Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Avalanche - Position: Right
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2003-2007 Hummer H2 - Position: Right
    • Cutting and Welding Required During Installation
  • 2009-2010 GMC Sierra 1500 - Position: Right
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2001-2005 Lexus IS300 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2007-2007 Chevrolet Avalanche - Position: Left
  • 2000-2011 Chevrolet Tahoe - Position: Right
    • Cutting and Welding Required During Installation
  • 2004-2009 GMC Yukon XL 1500 - Position: Right
    • Cutting and Welding Required During Installation
  • 2010-2010 Nissan Titan - Position: Left
    • Cutting and Welding Required During Installation
  • 1996-2000 Toyota 4Runner
    • Cutting and Welding Required During Installation
  • 2009-2011 Chevrolet Suburban 1500 - Position: Right
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2000-2003 Dodge Dakota
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 2002-2004 Oldsmobile Bravada
    • Cutting and Welding Required During Installation
  • 2003-2003 Ford Ranger - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-2000 GMC Savana 2500 - Position: Right
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1999-2000 Toyota 4Runner - Position: Rear
  • 2002-2008 Chevrolet Trailblazer
    • Cutting and Welding Required During Installation
  • 2005-2007 Ford Five Hundred - Position: Rear
    • Cutting and Welding Required During Installation
  • 2003-2006 GMC Yukon - Position: Left
    • Cutting and Welding Required During Installation
  • 2007-2007 Toyota Tundra - Position: Rear Right
  • 2005-2005 Chevrolet Express 1500 - Position: Right
    • Cutting and Welding Required During Installation
  • 2001-2003 Toyota Highlander - Position: Rear
    • Cutting and Welding Required During Installation
  • 2000-2000 Chevrolet Express 1500 - Position: Left
  • 2003-2007 Hummer H2 - Position: Left
  • 2000-2002 GMC Yukon XL 1500 - Position: Left
  • 2000-2001 Mitsubishi Montero Sport - Position: Rear
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 2010-2010 Nissan Titan - Position: Right

Attributes
Product type:
Aftermarket
Features and Benefits:
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highl
Brand Description:
OEM Grade Universal Catalytic Converter - 2.50in.
Meets or Exceeds Original Equipment Manufacture Specifications:
MagnaFlow OEM Grade Federal / EPA Compliant Universal Catalytic Converter 51006
Short Description:
OEM Grade
Inlet Type:
Weld-On
Outlet Type:
Weld-On
Air Tube Adaptable:
No
Body Shape:
Oval
Body Type:
Clam-Shell
Outlet Quantity:
1
Cut Type:
16
Edge Type:
5.625
Inlet Gasket Included:
No
Inlet Gasket Included:
12
Style:
3.75
Heat Shield Material:
Aluminized Steel
Clamps Included:
No
Outlet Diameter (MM):
2.5
Inlet Port Quantity:
2.5
Hangers Included:
No
Heat Shield Attached:
Yes
Life Cycle Status:
Available to Order
Sensor Port Count:
0
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Air Tube Count:
0
Item Level GTIN:
00841380068972
Outlet Gasket Included:
No
Quantity Per Application:
1
Inlet Quantity:
1
Outlet Orientation:
Straight
Inlet Orientation:
Straight
Tube Material:
Stainless Steel
Outlet Mounting Hardware Included:
No
Inlet Mounting Hardware Included:
No
Muffler Length Position Center (Inch):
No
Series:
OEM Grade
Substrate Material:
Ceramic
Universal Or Specific Fit:
Universal
Finish:
Stainless Steel
Hazardous Material:
No
Minimum Order Quantity:
1
Body Material:
Stainless Steel
Weight - Each (Gross Pounds):
7.0000
Height - Each (Inch):
4.5000
Length - Each (Inch):
17.7500
Width - Each (Inch):
7.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top