×
close
click to zoom in

MagnaFlow 53006 | Catalytic Converter

(No reviews yet) Write a Review
$97.00
Part Number
MAG53006
UPC:
841380010841
Condition:
New
5 customers are viewing this product

BRAND: MagnaFlow Exhaust Products

FEATURES:

  • Universal Catalytic Converter - 2.50in.
  • Catalytic Converter
  • Catalytic Converter
  • Universal Catalytic Converter - 2.50in.
  • Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

SPECIFICS:

Air Tube AdaptableNo
Body Height4.375
Body Length9
Body MaterialStainless Steel
Body ShapeRound
Body TypeClam Shell
Body Width4.375
FinishStainless Steel
Heat Shield AttachedYes
Heat Shield IncludedYes
Heat Shield MaterialAluminized Steel
Inlet AttachmentWeld-On
Inlet Diameter2.5
Inlet OrientationStraight
Inlet Quantity1
MaterialStainless Steel
Outlet AttachmentWeld-On
Outlet Diameter2.5
Outlet OrientationStraight
Outlet Quantity1
Overall Length13
Oxygen Sensor LocationNone
Sensor Port Count0
SeriesStandard Grade
Substrate MaterialCeramic
SubtitleFederal / EPA Compliant
TitleStandard Grade Universal
TypeUniversal

DOWNLOADS:

APPLICATIONS:

  • 1985-1985 Nissan Maxima - Position: Rear
    • Cutting and Welding Required During Installation
  • 1986-1988 Audi 5000 Quattro
    • Cutting and Welding Required During Installation
  • 1992-1993 Toyota Camry
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1991-1994 Nissan Sentra
    • Cutting and Welding Required During Installation
  • 1988-1989 Toyota Van
    • Cutting and Welding Required During Installation
  • 1993-1993 Isuzu Rodeo
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1990-1993 Nissan 300ZX - Position: Left
    • Cutting and Welding Required During Installation
  • 1994-1995 Nissan 300ZX - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 1994-1995 Volkswagen Jetta
    • Cutting and Welding Required During Installation
  • 1996-1996 Nissan 300ZX - Position: Rear Left
  • 1988-1988 Ford Ranger - Position: Rear
  • 1986-1988 Toyota Celica
    • Cutting and Welding Required During Installation
  • 1986-1988 Nissan 200SX
    • Cutting and Welding Required During Installation
  • 1980-1988 Audi 5000
    • Cutting and Welding Required During Installation
  • 1986-1986 Nissan Stanza
    • Cutting and Welding Required During Installation
  • 1986-1992 Toyota Supra
    • Cutting and Welding Required During Installation
  • 1988-1989 Ford Ranger - Position: Front
    • Cutting and Welding Required During Installation
  • 1988-1989 Ford Bronco II - Position: Front
    • Cutting and Welding Required During Installation
  • 1984-1989 Nissan 300ZX
    • Cutting and Welding Required During Installation
  • 1989-1992 Toyota Cressida
    • Cutting and Welding Required During Installation
  • 1996-1996 Nissan 300ZX - Position: Rear Right
    • Cutting and Welding Required During Installation
  • 1990-1991 Audi 100
    • Cutting and Welding Required During Installation
  • 1989-1994 Nissan 240SX
    • Cutting and Welding Required During Installation
  • 1988-1989 Ford Bronco II - Position: Rear
  • 1994-1995 Nissan 300ZX - Position: Rear Right
  • 1990-1994 Nissan D21
    • Cutting and Welding Required During Installation
  • 1992-1994 Toyota Camry
    • Cutting and Welding Required During Installation
  • 1990-1993 Nissan 300ZX - Position: Right
  • 1994-1995 Isuzu Trooper - Position: Front
    • Cutting and Welding Required During Installation

Product type:
Aftermarket
Features and Benefits:
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With
Brand Description:
Standard Grade Universal Catalytic Converter - 2.50in.
Meets or Exceeds Original Equipment Manufacture Specifications:
MagnaFlow Standard Grade Federal / EPA Compliant Universal Catalytic Converter 53006
Short Description:
Standard Grade
Inlet Type:
Weld-On
Outlet Type:
Weld-On
Air Tube Adaptable:
No
Body Shape:
Round
Body Type:
Clam-Shell
Outlet Quantity:
1
Cut Type:
13
Edge Type:
4.375
Inlet Gasket Included:
No
Inlet Gasket Included:
9
Style:
4.375
Heat Shield Material:
Aluminized Steel
Clamps Included:
No
Outlet Diameter (MM):
2.5
Inlet Port Quantity:
2.5
Hangers Included:
No
Heat Shield Attached:
Yes
Life Cycle Status:
Available to Order
Sensor Port Count:
0
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Air Tube Count:
0
Item Level GTIN:
00841380010841
Outlet Gasket Included:
No
Quantity Per Application:
1
Inlet Quantity:
1
Outlet Orientation:
Straight
Inlet Orientation:
Straight
Tube Material:
Stainless Steel
Outlet Mounting Hardware Included:
No
Inlet Mounting Hardware Included:
No
Muffler Length Position Center (Inch):
No
Series:
Standard Grade
Substrate Material:
Ceramic
Universal Or Specific Fit:
Universal
Finish:
Stainless Steel
Hazardous Material:
No
Minimum Order Quantity:
1
Body Material:
Stainless Steel
Weight - Each (Gross Pounds):
5.0000
Height - Each (Inch):
4.7500
Length - Each (Inch):
13.7500
Width - Each (Inch):
5.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top