×
close
click to zoom in

MagnaFlow 5592306 | Catalytic Converter

(No reviews yet) Write a Review
$1,253.00
Part Number
MAG5592306
Condition:
New
5 customers are viewing this product

BRAND: MagnaFlow Exhaust Products

FEATURES:

  • Catalytic Converter
  • Direct-Fit Catalytic Converter
  • MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5592306 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
  • Catalytic Converter
  • Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
  • Direct-Fit Catalytic Converter

SPECIFICS:

Air Tube AdaptableNo
Body Height3.75
Body Length12
Body ShapeOval
Body TypeClam Shell
Body Width6.375
Clamp IncludedNo
Converter Quantity1
FinishStainless Steel
Gasket IncludedNo
Hangers IncludedNo
Heat Shield AttachedYes
Heat Shield MaterialAluminized Steel
Inlet AttachmentWeld-On
Inlet Diameter2.5
Inlet OrientationStraight
Inlet Quantity1
MaterialStainless Steel
Mounting Hardware IncludedNo
Outlet AttachmentWeld-On
Outlet Diameter2.5
Outlet OrientationStraight
Outlet Quantity1
Overall Length16
Sensor Port Count0
SeriesCalifornia
SubstrateCeramic
SubtitleCalifornia / CARB Compliant
TitleCalifornia Universal
TypeUniversal

DOWNLOADS:

APPLICATIONS:

  • 2011-2011 Saab 9-4X - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2013-2013 Infiniti JX35 - Position: Rear
  • 2009-2016 GMC Yukon - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2014-2015 GMC Yukon - Position: Rear
  • 2009-2010 Hummer H3T - Position: Rear Right
  • 2009-2012 GMC Canyon - Position: Rear Right
  • 2007-2010 Toyota Tundra - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation with Curved Muffler Inlet
  • 2007-2008 Ford E-350 Super Duty - Position: Rear Right
  • 2007-2007 Ford E-250 - Position: Rear Left
  • 2009-2009 Chevrolet Silverado 1500 - Position: Rear
  • 2014-2014 Chevrolet Suburban 1500 - Position: Rear
  • 2009-2010 Hummer H3T - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2008 Ford E-150 - Position: Rear Right
  • 2009-2015 Chevrolet Traverse - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2010 Volkswagen Touareg - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2016 Toyota Tundra - Position: Rear Right
  • 2012-2012 Nissan Quest - Position: Rear
  • 2013-2016 Toyota Land Cruiser - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2010 Saturn Outlook - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Tahoe - Position: Rear
  • 2009-2013 Chevrolet Avalanche - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2005-2005 Chevrolet Express 3500 - Position: Rear Right
  • 2005-2005 GMC Savana 3500 - Position: Rear Right
  • 2011-2013 Cadillac Escalade EXT - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Avalanche - Position: Rear
  • 2009-2009 Volkswagen Touareg - Position: Rear Right
  • 2013-2016 Toyota Land Cruiser - Position: Rear Right
  • 2010-2015 Lexus RX350 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2007 Ford E-250 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation Split Date To: To 10/16/2006
  • 2013-2013 Infiniti JX35 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2015-2016 GMC Canyon - Position: Rear
  • 2011-2016 GMC Terrain - Position: Rear
  • 2006-2012 Toyota RAV4 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2005-2005 GMC Savana 2500 - Position: Rear Right
  • 2005-2009 Lexus GX470 - Position: Rear Right
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2010 Audi Q7 - Position: Rear Right
  • 2007-2015 Acura RDX - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2015-2016 GMC Yukon XL - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2014-2014 Cadillac Escalade ESV - Position: Rear
  • 2015-2015 Chevrolet Suburban - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2008-2008 Hummer H3 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2008 Ford E-350 Super Duty - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation with Y-Pipe Converter
  • 2008-2016 Toyota Sequoia - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2011-2011 Honda CR-V - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2011-2016 Cadillac Escalade - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2009 Chevrolet Suburban 1500 - Position: Rear
  • 2009-2012 GMC Canyon - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2010 Toyota Tundra - Position: Rear Left
  • 2013-2015 Toyota Tacoma - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2015-2015 Chevrolet Silverado 1500 - Position: Rear
  • 2009-2012 Chevrolet Colorado - Position: Rear Right
  • 2005-2009 Toyota 4Runner - Position: Rear Right
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2009 GMC Yukon - Position: Rear
  • 2009-2015 GMC Acadia - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2015-2016 Chevrolet Colorado - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2009 Toyota Tundra - Position: Rear Right
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2014-2014 Nissan Pathfinder - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2014 GMC Yukon XL 1500 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2016 GMC Sierra 1500 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2010-2011 Cadillac SRX - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2012-2015 Nissan Rogue - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2007 Ford E-150 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation Split Date To: To 10/16/2006
  • 2010-2016 GMC Terrain - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2005-2005 Chevrolet Express 2500 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2005-2009 Nissan Quest - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2010 Audi Q7 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2005-2005 GMC Savana 3500 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2005-2005 Chevrolet Express 3500 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2013-2016 Lexus LX570 - Position: Rear Right
  • 2014-2014 Infiniti QX60 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2016 Chevrolet Silverado 1500 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2008-2012 GMC Canyon - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2008 Ford E-150 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2014 Chevrolet Suburban 1500 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2012-2015 Chevrolet Captiva Sport - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2015 Toyota Highlander - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2014 Honda Ridgeline - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2005-2009 Toyota 4Runner - Position: Rear Right
  • 2004-2015 Toyota Sienna - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2013-2016 Lexus LX570 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2011-2016 Chevrolet Equinox - Position: Rear
  • 2009-2014 Nissan Murano - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2005-2005 Chevrolet Express 2500 - Position: Rear Right
  • 2015-2015 GMC Sierra 1500 - Position: Rear
  • 2007-2016 Toyota Tundra - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2008-2010 Hummer H3 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2007 Ford E-150 - Position: Rear Left
  • 2009-2009 GMC Yukon XL 1500 - Position: Rear
  • 2014-2016 Volkswagen Tiguan - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2013 Acura MDX - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2008 Ford E-250 - Position: Rear Right
  • 2015-2016 Chevrolet Colorado - Position: Rear
  • 2009-2015 Honda Pilot - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2009 GMC Sierra 1500 - Position: Rear
  • 2013-2013 Nissan Pathfinder - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation Split Date From: From 6/1/2013
  • 2014-2015 Nissan Rogue Select - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2014-2014 Cadillac Escalade - Position: Rear
  • 2008-2016 Toyota Sequoia - Position: Rear Right
  • 2005-2005 GMC Savana 2500 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2011-2014 Nissan Quest - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2010-2016 Chevrolet Equinox - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2015-2016 GMC Canyon - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2011-2016 Honda Odyssey - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2014-2015 Nissan Rogue - Position: Rear
  • 2014-2015 Chevrolet Tahoe - Position: Rear
  • 2009-2015 Buick Enclave - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2015 Chevrolet Tahoe - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2009-2009 Nissan Murano - Position: Rear
  • 2009-2012 Chevrolet Colorado - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2007-2008 Ford E-250 - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2010-2012 Mazda CX-7 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2008-2008 Isuzu i-370 - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2012-2015 Toyota Tacoma - Position: Rear Left
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2011-2016 Cadillac Escalade ESV - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2011-2011 Toyota Sienna - Position: Rear
  • 2008-2012 Chevrolet Colorado - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
  • 2014-2014 GMC Yukon XL 1500 - Position: Rear
  • 2015-2015 GMC Yukon XL - Position: Rear
  • 2015-2015 Chevrolet Suburban - Position: Rear
  • 2011-2011 Toyota Sienna - Position: Rear
    • Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation Split Date To: To 9/1/2011
  • 2008-2010 Hummer H3 - Position: Rear Right

Product type:
Aftermarket



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top