×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 46D2256A | Mazda Miata Front Lower Suspension Ball Joint
click to zoom in

ACDelco 46D2256A | Mazda Miata Front Lower Suspension Ball Joint

(No reviews yet) Write a Review
$22.99
Part Number
ACD46D2256A
UPC:
808709171287
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco Advantage Ball Joints are economical replacement components for your GM and non-GM vehicle. These ball joints connect your vehicle's control arm to its steering knuckle, and feature a polyurethane dust boot and one-piece housing. These dependable aftermarket suspension ball joints offer quality and performance, all at an economical price. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Coated for corrosion resistance
  • Cost effective option for convenience
  • Forged housing for durability
  • Forged, machined shell provides strength
  • Manufactured at ISO 9001-certified facilities
  • Mazda
  • Undergo extreme impact, wear, and fatigue testing to ensure quality and durability

SPECIFICS:

AdjustableNo
Ball Joint AssemblyYes
Castle Nut IncludedYes
Cotter Pin HoleYes
Dust Boot IncludedYes
FAQ - Answer 1Yes. ACDelco Advantage Chassis parts are for both GM and non-GM vehicle applications.
FAQ - Answer 2Yes. You should replace your ball joints as a set to make front end alignment easier.
FAQ - Answer 3Yes. Installing new ball joints can interfere with the alignment of your vehicle, so a full four-wheel vehicle alignment is recommended following ball joint replacement.
FAQ - Question 1Can I use ACDelco Advantage Chassis parts on my non-GM vehicle?
FAQ - Question 2Should I replace my ball joints as a set?
FAQ - Question 3Should I perform a vehicle alignment after installing ball joints?
Good Maintenance Practices - Section 1 - Bullet 1Inspect or have your ball joints inspected for signs of wear. Over time, lubrication inside the ball joint can dry out, leading to joint wear. Even sealed ball joints can be exposed to air, and if the ball joint's protective boot is damaged, dirt and debris could further harm the function and life of the joint. Exposure to harsh driving conditions like pot holes, bumpy road surfaces, or road salt may also cause ball joints to fail. Worn ball joints could result loss of vehicle control or tire damage. Inspect your ball joints regularly, following exposure to events that may harm the component, or when you experience signs of ball joint wear.
Good Maintenance Practices - Section 1 - Bullet 2Use new components during installation. If you replace your vehicle's ball joints, make sure to use new mounting hardware, rather than reusing the old.
Good Maintenance Practices - Section 1 - Bullet 3Avoid replacing only one ball joint at a time. If you choose to replace a ball joint, you should consider replacing ball joints as a set to make alignment easier.
Good Maintenance Practices - Section 1 - Bullet 4Installing a new ball joint can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any ball joint replacement.
GreasableNo
Length (in)5.2
MaterialSteel
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mounting Hole Quantity2
Mounting TypeBolt-In
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Tire wear: as ball joints wear, they allow the front wheels of your vehicle to point outward and away from each other in a 'toe-out' position. This position will result in uneven wear on one side of your tire that feathers across the tread toward its center. Worn ball joints may also be signaled by a more extreme variation of uneven tire wear, called camber wear, where the tire leans in or out at the top, and a hard line of excess wear is seen along one edge of your vehicle's tire.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Alignment issues: an inability to set your vehicle's alignment to proper specifications may be a sign of ball joint wear.
Stud TypeThreaded
Suspension Grade TypeStandard
TypeBolt-On
Weight (lb)1.5
Width (in)4

DOWNLOADS:

APPLICATIONS:

  • 1999-2005 Mazda Miata - Position: Front Lower

Attributes
Product type:
Aftermarket
Product Description:
Front Lower Suspension Ball Joint Assembly
Height (Inch):
3.2
Material:
Steel
Programming Required:
No
Mounting Type:
Bolt-In
Type:
Bolt-On
Mounting Hole Quantity:
2
Adjustable:
No
Cotter Pin Hole:
Yes
Suspension Grade Type:
Standard
Greasable:
No
Dust Boot Included:
Yes
Castle Nut Included:
Yes
Ball Joint Assembly:
Yes
Stud Type:
Threaded
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Undergo extreme impact, wear, and fatigue testing to ensure quality and durability
Features & Benefits - Bullet 4:
Manufactured at ISO 9001-certified facilities
Features & Benefits - Bullet 3:
Coated for corrosion resistance
Life Cycle Status:
Announced
Features & Benefits - Bullet 1:
Forged housing for durability
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Weight (lb) (Pound):
1.5
Item Level GTIN:
00808709171287
Width (in) (Inch):
4
Length (in) (Inch):
5.2
Signs of Wear & Troubleshooting - Section 1 - Bull:
Alignment issues: an inability to set your vehicle's alignment to proper specifications may be a sign of ball joint wear.
FAQ - Answer 2:
Yes. You should replace your ball joints as a set to make front end alignment easier.
FAQ - Question 3:
Should I perform a vehicle alignment after installing ball joints?
FAQ - Question 1:
Can I use ACDelco Advantage Chassis parts on my non-GM vehicle?
Features & Benefits - Bullet 6:
Cost effective option for convenience
FAQ - Question 2:
Should I replace my ball joints as a set?
Features & Benefits - Bullet 5:
Forged, machined shell provides strength
FAQ - Answer 1:
Yes. ACDelco Advantage Chassis parts are for both GM and non-GM vehicle applications.
Good Maintenance Practices - Section 1 - Bullet 2:
Use new components during installation. If you replace your vehicle's ball joints, make sure to use new mounting hardware, rather than reusing the old.
Good Maintenance Practices - Section 1 - Bullet 3:
Avoid replacing only one ball joint at a time. If you choose to replace a ball joint, you should consider replacing ball joints as a set to make alignment easier.
Good Maintenance Practices - Section 1 - Bullet 4:
Installing a new ball joint can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any ball joint replacement.
FAQ - Answer 3:
Yes. Installing new ball joints can interfere with the alignment of your vehicle, so a full four-wheel vehicle alignment is recommended following ball joint replacement.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Country of Origin:
Taiwan
Weight - Each (Gross Pounds):
01.50
Weight - Case (Gross Pounds):
15.00
Height - Each (Inch):
03.20
Height - Case (Inch):
06.00
Length - Each (Inch):
05.20
Length - Case (Inch):
20.38
Width - Each (Inch):
04.00
Width - Case (Inch):
06.88



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top