×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Cardone 21-157 | Power Steering Pump
click to zoom in

Cardone 21-157 | Power Steering Pump

(No reviews yet) Write a Review
$248.39
Part Number
CAD21-157
UPC:
82617812337
Condition:
New
5 customers are viewing this product

video gallery

Description

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

BRAND: Cardone Reman

FEATURES:

  • Mercedes-Benz E350 2007, E550 2007, ML350 2006, ML500 2007-06, R500 2007-06
  • Remanufactured Power Steering Pump
  • Power Steering Pump
  • Power Steering Pump
  • Reman. Power Steering Pump
  • Power Steering Pump, Steering Pump, Pump, Hydraulic Power Steering Pump

SPECIFICS:

E-WasteNo
FAQsShould I ever change my fluid, even though nothing is wrong?
FAQsWhy do I still have hard steering in one direction after I replaced the pump?
FAQsWhy is the pump making a whining noise all of the time?
FAQsThe pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQsYes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
FAQsA whining pump is usually caused by air in the system. Remove reservoir lid and inspect fluid level and condition. If fluid has foam or air bubbles present, you must bleed the system again. Some systems are very difficult to bleed manually and may require the use of a vacuum pump to extract all of the air from the system.
FAQsI only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQsThe problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions.
FAQsThere may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
FAQsI bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
Features and BenefitsUnits are supplied with 100% tested and calibrated pressure relief valves.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsAll critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsFInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Features and BenefitsShafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Features and BenefitsAll units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Hose Port TypeO-Ring
Housing MaterialAluminum
Mounting Hardware IncludedNo
Package ContentsPump, O-Ring (4), Washer (2), Instruction Sheet
Power Steering Outlet Thread SizeM16 x 1.5
Power Steering Pump Inlet Attachement TypeQuick Connect
Power Steering Pump Outlet Attachment TypeTHREADED
Power Steering Pump Outlet Quantity1
Power Steering Reservoir Cap IncludedNo
Product ConditionRemanufactured
Pulley Attachement TypePress-On
Pulley IncludedNo
Remote ReservoirNo
Reservoir IncludedNo

DOWNLOADS:

WARRANTY TIME: 36 Months

INTERCHANGE:

  • Mercedes-Benz: 0044668501
  • Mercedes-Benz: 0044667601
  • Mercedes-Benz: 0044668601
  • Mercedes-Benz: 0044669101

APPLICATIONS:

  • 2007-2007 Mercedes-Benz E550
  • 2006-2006 Mercedes-Benz ML350
  • 2007-2007 Mercedes-Benz E350
  • 2006-2007 Mercedes-Benz ML500
  • 2006-2007 Mercedes-Benz R500

Attributes
Product type:
Aftermarket
Features and Benefits:
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the o
Brand Description:
Power Steering Pump
Mounting Hardware Included:
No
Housing Material:
Aluminum
Hazardous Material:
No
Minimum Order Quantity:
1
Reservoir Included:
No
Package Contents:
Hydraulic Pump; Instruction Sheet; Sealing Kit
Product Condition:
Remanufactured
E-Waste:
No
Pulley Included:
No
Hose Port Type:
O-Ring
Remote Reservoir:
No
FAQs:
Why is the pump making a whining noise all of the time?
FAQs:
Why do I still have hard steering in one direction after I replaced the pump?
FAQs:
The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQs:
The problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions.
FAQs:
Should I ever change my fluid, even though nothing is wrong?
FAQs:
I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQs:
I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
Features and Benefits:
Units are supplied with 100% tested and calibrated pressure relief valves.
Life Cycle Status:
Available to Order
Features and Benefits:
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Item Level GTIN:
00082617812337
Features and Benefits:
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Quantity Per Application:
1
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Features and Benefits:
All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Pulley Attachement Type:
Press-On
Power Steering Reservoir Cap Included:
No
Power Steering Pump Inlet Attachement Type:
Quick Connect
Power Steering Pump Outlet Attachment Type:
THREADED
Power Steering Pump Outlet Quantity:
1
Short Description:
Pwr Steering Pump
Weight - Each (Gross Pounds):
3.7500
Height - Each (Inch):
9.5000
Length - Each (Inch):
5.5000
Width - Each (Inch):
4.6250



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top