The standard tach drive for MSD tach drive distributors is a 3/16 inch tang drive cable. In most cases this type of drive will work, but for those who require the 0.104 inch square drive (Corvette style), MSD offers a tang to square drive adapter to fit all MSD tach drive distributors.
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
MSD
In some instances when you install an MSD ignition, the factory ECU may not be able to distinguish when the coil fires. This is the signal that is also responsible for firing the injectors (or the...
MSD
If you are triggering an MSD blaster, 5, 6, SCI, or 7 series ignition with its white wire or points terminal, you will need the PN 8910 tach adapter. The PN 8910 will correct the operation of most...
MSD
If you are running a dual ignition system, this little device will allow the tachometer to operate with both ignitions. Simply install the splitter between the tach outputs and the tachometer. Female...
MSD
Ever wonder how you can install an aftermarket tachometer on a vehicle with no distributor and multiple coil packs? MSD has the answer with the distributorless tach driver. The compact tach driver...
MSD
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands...
