The magnetic signal stabilizer converts the signal from a magnetic pickup to a square wave trigger signal for the MSD control.
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
MSD
Just think of the things you can easily accomplish with our GMR pickup! This little device simply attaches, with no splicing or cutting, to a current carrying wire and turns that information into a...
AutoMeter
Designed to help correct bouncy, or spiking tachometer operation caused by points or noisy ignitions.BRAND: AutoMeterFEATURES:TACHOMETER SIGNAL FILTERWorks w/AutoMeter And Autogage TachometersTACH...
MSD
The standard tach drive for MSD tach drive distributors is a 3/16 inch tang drive cable. In most cases this type of drive will work, but for those who require the 0.104 inch square drive (Corvette...
MSD
In some instances when you install an MSD ignition, the factory ECU may not be able to distinguish when the coil fires. This is the signal that is also responsible for firing the injectors (or the...
MSD
If you are running a dual ignition system, this little device will allow the tachometer to operate with both ignitions. Simply install the splitter between the tach outputs and the tachometer. Female...
