If, after installing an MSD ignition control, your tachometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesn't operate correctly, your application may require a tach adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factory's components. There are a few tach adapters available and for more information see pages 152 and 153. Each adapter is simple to wire in and will have your MSD and vehicle firing away in no time. If you are using the magnetic pick-up input (green and violet wires) to trigger your MSD ignition, you will need the PN 8920 tach adapter. The PN 8920 will correct the operation of most voltage-triggered tachometers that do not work directly off the tach output terminal of the MSD control. This adapter should also be used on current-triggered tachs (hooked in series with the ignition switch).
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
MSD
Just think of the things you can easily accomplish with our GMR pickup! This little device simply attaches, with no splicing or cutting, to a current carrying wire and turns that information into a...
MSD
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands...
MSD
The standard tach drive for MSD tach drive distributors is a 3/16 inch tang drive cable. In most cases this type of drive will work, but for those who require the 0.104 inch square drive (Corvette...
MSD
MSD's Atomic EFI systems were designed with two goals; to simplify EFI and overall performance. Simplicity was achieved through wired-less technology for easy installation and programming. ...
MSD
MSD Atomic AirForce throttle body adapters are designed to attach an OEM LS1/LS6 factory throttle body to an MSD Atomic AirForce polymer intake manifold. They're made from quality materials and...
