×
close
click to zoom in

ACDelco 92204529 | Pontiac G8 Starter Motor

(No reviews yet) Write a Review
$169.99
Part Number
ACD92204529
UPC:
707773897508
Condition:
New
5 customers are viewing this product

ACDelco GM Original Equipment Light Duty Starters have components that are newly manufactured and are GM-recommended replacement for your vehicle's original starter. ACDelco GM OE Light Duty Starters consist of a powerful DC motor coupled to the starter drive pinion. The starter drive pinion engages the engine flywheel to crank the engine. These original equipment starters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • 100% newly manufactured as an exact replacement for your GM vehicle's original starter
  • Components are tested to meet original specification requirements for remarkable durability
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured to GM OE specifications for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • Pontiac

SPECIFICS:

Case GroundingGrounded Case
FamilyMIPGM0T3
FAQ - Answer 1Yes. It is included where the design of the starter requires a solenoid.
FAQ - Answer 2Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Answer 3No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive make appropriate contact with the flywheel.
FAQ - Question 1Is the solenoid included?
FAQ - Question 2Can I be assured that the unit will last, especially in extreme weather?
FAQ - Question 3Do I always need a starter shim?
Good Maintenance Practices - Section 1 - Bullet 1Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 2Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - Section 1 - Bullet 3Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - Section 1 - Bullet 4It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Height (in)10.25
Length (in)13.88
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mounting Bolt Hole Quantity3
Nose Cone MaterialAluminum
Nose Cone TypeClosed Nose
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Clunking/grinding noise when starting engine
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Starter will not engage
Signs of Wear & Troubleshooting - Section 1 - HeaderIndicators that there could be a problem with your vehicle's starter are:
Signs of Wear & Troubleshooting - Section 2 - Bullet 1Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bullet 2Loose mounting bolts
Signs of Wear & Troubleshooting - Section 2 - Bullet 3Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Bullet 4Damage to flywheel
Signs of Wear & Troubleshooting - Section 2 - HeaderOther vehicle parts that might cause related starter problems include:
Solenoid AttachedYes
Starter RotationClockwise
Tooth Quantity12
Voltage12 VDC
Weight (lb)5.95
Width (in)13.25

EXCEPT BREAKPOINT FOR 2009 1/2 MODEL YEAR(BSI)

DOWNLOADS:

APPLICATIONS:

  • 2008-2009 Pontiac G8

Product type:
Aftermarket
Brand Description:
Starter
Programming Required:
No
Tooth Quantity:
12
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Components are tested to meet original specification requirements for remarkable durability
Features & Benefits - Bullet 4:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - Bullet 1:
100% newly manufactured as an exact replacement for your GM vehicle's original starter
Weight (lb) (Pound):
5.95
Height (in) (Inch):
10.25
Width (in) (Inch):
13.25
Length (in) (Inch):
13.88
Signs of Wear & Troubleshooting - Section 1 - Bull:
Clunking/grinding noise when starting engine
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bull:
Starter will not engage
FAQ - Answer 2:
Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Question 3:
Do I always need a starter shim?
FAQ - Question 1:
Is the solenoid included?
Life Cycle Status:
Superseded
FAQ - Question 2:
Can I be assured that the unit will last, especially in extreme weather?
Life Cycle Status Description:
Superseded - Part is being replaced by the surviving part number.
Signs of Wear & Troubleshooting - Section 1 - Head:
Indicators that there could be a problem with your vehicle's starter are:
Item Level GTIN:
00707773897508
Features & Benefits - Bullet 5:
Manufactured to GM OE specifications for fit, form, and function
FAQ - Answer 1:
Yes. It is included where the design of the starter requires a solenoid.
Good Maintenance Practices - Section 1 - Bullet 1:
Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 2:
Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - Section 1 - Bullet 3:
Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - Section 1 - Bullet 4:
It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
FAQ - Answer 3:
No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive make appropriate contact with the flywheel.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Signs of Wear & Troubleshooting - Section 2 - Bull:
Damage to flywheel
Signs of Wear & Troubleshooting - Section 2 - Bull:
Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bull:
Loose mounting bolts
Signs of Wear & Troubleshooting - Section 2 - Bull:
Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Head:
Other vehicle parts that might cause related starter problems include:
Voltage:
12 VDC
Mounting Bolt Hole Quantity:
3
Solenoid Attached:
Yes
Family:
MIPGM0T3
Power Rating (Kilowatts):
1.40
Power Rating (Horsepower):
1.87
Mounting Flange to Pinion End at Rest (Millimeter):
29
Starter Rotation:
Clockwise
Nose Cone Material:
Aluminum
Case Grounding:
Grounded Case
Nose Cone Type:
Closed Nose
Country of Origin:
Japan
Weight - Each (Gross Pounds):
05.95
Height - Each (Inch):
05.12
Length - Each (Inch):
11.00
Width - Each (Inch):
08.19



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top