×
close
click to zoom in

Skyjacker JP40RS | Rear Leaf Spring

(No reviews yet) Write a Review
$334.58
Part Number
SKYJP40RS
UPC:
803696145143
Condition:
New
5 customers are viewing this product

Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

BRAND: Skyjacker

FEATURES:

  • Constructed As Progressive Multileaf Packs
  • Limited Lifetime Warranty
  • Load Capacity Will Be Equal or Greater Than OE
  • Made With American Steel
  • SOFTRIDE SPRG 4IN. REARJEEP PU
  • SOFTRIDE SPRG 4in.REARJEEP PU

SPECIFICS:

Lift/Drop Height4 in.
Lift/Drop Height3 in.
Lift/Drop Height3.5 in.
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageCalifornia Residents- WARNING: Cancer and/or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov)

APPLICATIONS:

  • 1976-1988 Jeep J20 - Position: Rear
    • Lift Height 3-4 in.; Single
  • 1984-1991 Jeep Grand Wagoneer - Position: Rear
    • Lift Height 3-4 in.; Single
  • 1975-1975 Jeep J20 - Position: Rear
    • Lift Height 3-4 in.; Single Models Must Have 131 in. Whl Base & 7200 GVWR Or More For Rr Sprg To Fit
  • 1976-1988 Jeep J10 - Position: Rear
    • Lift Height 3-4 in.; Single
  • 1975-1975 Jeep J10 - Position: Rear
    • Lift Height 3-4 in.; Single Models Must Have 131 in. Whl Base & 7200 GVWR Or More For Rr Sprg To Fit
  • 1976-1983 Jeep Cherokee - Position: Rear
    • Lift Height 3-4 in.; Single
  • 1976-1983 Jeep Wagoneer - Position: Rear
    • Lift Height 3-4 in.; Single

Product type:
Aftermarket
Features and Benefits:
Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the
Features and Benefits:
Constructed As Progressive Multileaf Packs
Features and Benefits:
Load Capacity Will Be Equal or Greater Than OE
Features and Benefits:
Made With American Steel
Features and Benefits:
Limited Lifetime Warranty
California Proposition 65:
California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov)
Brand Description:
SOFTRIDE SPRG 4IN. REARJEEP PU
Product Description:
SOFTRIDE SPRG 4in.REARJEEP PU
Lift/Drop Height:
3.5 in.
Lift/Drop Height:
3 in.
Lift/Drop Height:
4 in.
WARNING CA Proposition 65:
Yes
Short Description:
Leaf Spring
Hazardous Material:
No
Weight - Each (Gross Pounds):
58.0000
Height - Each (Inch):
3.0000
Length - Each (Inch):
56.0000
Width - Each (Inch):
3.0000
Life Cycle Status:
Available to Order
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Item Level GTIN:
00803696145143

Prop 65 WarningWARNING

This product can expose you to chemicals, including California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov) which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.




Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top