Correct front pinion and caster issues on your stock or lifted Jeep with this adjustable cam kit from SPC. This kit is designed specifically for the new Jeep Wrangler JL and will provide ±1.5° of adjustment. NOTE: You will need to slot the axle bracketsot get the adjustment you need, use SPC rotary file set 85130 or similar.
| California Proposition 65 | WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. |
WARNINGThis product can expose you to chemicals, including WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
SPC Performance
Dodge solid front axled 3/4- and 1-ton trucks equipped with non-adjustable or corroded lower control arm bolts can now replace their OEM bolts (50mm cams) with the 82385 Caster Adjustment Kit (pair)...
SPC Performance
These cams replace the front axle bolts to provide caster and pinion angle (up to 3 degree total change). To elongate the OEM bolt holes use our knock out punch - # 74910. Front caster will change as...
SPC Performance
Replace the non adjustable or corroded OE bolts on Dodge 3/4 and 1-ton trucks to get ± 1.5 ° degrees of caster and pinion angle change. Whether the truck is lifted or stock ride height, optimize...
SPC Performance
These cams replace the front axle bolts to provide caster and pinion angle (up to 3 degree total change).BRAND: Specialty ProductsFEATURES:JEEP FRONT CASTER CAMS (2)SPECIFICS:California Proposition...
SPC Performance
These arms lower your front end by 1" and add 1 degree positive caster for a ready-to-run aggressive stance. Optional Ride Height Tuning Kits are available for use with our Pro Series Springs or...
