Our 2nd Gen 'F' lower arms feature a rugged formed plate body. To achieve an aggressive, ready-to-run stance, these arms will add 2.5 degrees positive caster and may be configured for stock or lowered height. Ride Height spacer and Coilover Mounts are available. Note: Shown with an optional OEM style bump stop. (#95339).
| California Proposition 65 | WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. |
WARNINGThis product can expose you to chemicals, including WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
SPC Performance
These arms lower your front end by 1" and add 1 degree positive caster for a ready-to-run aggressive stance. Optional Ride Height Tuning Kits are available for use with our Pro Series Springs or...
SPC Performance
Add an aggressive, ready to run stance to your F-body (1st Gen) with lower control arms from SPC. This pair of arms feature heavy duty 1.5" steel tubes with greasable delrin bushings giving you...
SPC Performance
Upgrade the front or rear non-adjustable factory trailing arms on your Porsche 996 and 997 with this pair of fully adjustable arms from SPC Performance. Constructed from forged 6061-T6 aluminum with...
SPC Performance
These heavy-duty caster axle shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 3-1/2 degree taper. Six shims per box.BRAND: Specialty...
SPC Performance
If you are running modern radial tires you should not follow factory alignment specifications for caster, SPC recommends 3° of caster to promote return to center steering. Stock strut rods on the 1st...
