×
close
click to zoom in

Weiand 8021WND | Lower Engine Intake Manifold

(No reviews yet) Write a Review
$403.10
Part Number
WEI8021WND
UPC:
32474802101
Condition:
New
5 customers are viewing this product

Weiand is no stranger to the performance aftermarket. Since the 1930s, Weiand has been delivering serious performance parts to street /strip enthusiasts, marine customers and hard core racers. Times have changed as bigger motors, higher RPMs, better ignition systems and ultra efficient cylinder head designs have generated a need for better manifold technology. Weiand has delivered!

BRAND: Weiand

FEATURES:

  • Holley Performance Emission Code 3: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles: 1965 and older U.S. manufactured California Certified vehicles/1967 and older U.S. manufactured Federally Certified vehicles/1967 and older Foreign manufactured vehicle. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle
  • Square Carburetor Mounting Flange
  • Stealth™ Intake Manifold 429; 460 V8 (Co
  • Stealth™ Intake Manifold
  • Stealth™ Intake Manifold; Power Band Idle-6800 RPM; High Rise; w/Cobra Jet/Super Cobra Jet Heads; Square Carb. Mounting Flange; No EGR Provisions; Satin Finish;
  • Idle-6800 RPM Power Band
  • Height Front 5.25 in.; Rear 6.75 in.
  • Port Size 2.49 in. Height x 2.20 in. Width
  • High Rise/Dual Plane Design

SPECIFICS:

ConstructionCast
Cylinder Head TypeStandard
EmissionWithout EGR
Engine Make/SizeFord Big Block V8
FinishSatin
Front Height5.250 in.
Fuel System TypeCarb
Manifold TypeHigh Rise
Number of CarbsOne
PositionLower
Rear Height6.750 in.
RPM RangeIdle-6800
UsageStreet/Strip
WARNING CA Proposition 65No

Power Band Idle-6800 RPM; High Rise; w/Cobra Jet/Super Cobra Jet Heads; Square Carb. Mounting Flange; No EGR Provisions; Satin Finish Legal Only For Off-Highway Use Or Racing

DOWNLOADS:

APPLICATIONS:

  • 1978-1978 Ford E-100 Econoline - Position: Lower
  • 1969-1974 Ford Country Squire - Position: Lower
  • 1969-1974 Mercury Monterey - Position: Lower
  • 1975-1987 Ford E-250 Econoline Club Wagon - Position: Lower
  • 1973-1979 Ford F-250 - Position: Lower
  • 1975-1980 Ford E-250 Econoline - Position: Lower
  • 1973-1976 Mercury Cougar - Position: Lower
  • 1970-1970 Ford Fairlane - Position: Lower
  • 1977-1987 Ford E-350 Econoline Club Wagon - Position: Lower
  • 1969-1974 Mercury Colony Park - Position: Lower
  • 1969-1970 Mercury Marauder - Position: Lower
  • 1969-1971 Ford Mustang - Position: Lower
  • 1972-1976 Lincoln Mark IV - Position: Lower
  • 1983-1987 Ford F-250 - Position: Lower
  • 1968-1976 Ford Thunderbird - Position: Lower
  • 1977-1978 Lincoln Mark V - Position: Lower
  • 1968-1971 Lincoln Mark III - Position: Lower
  • 1969-1976 Ford Custom 500 - Position: Lower
  • 1970-1977 Ford Ranchero - Position: Lower
  • 1975-1987 Ford E-350 Econoline - Position: Lower
  • 1969-1974 Ford Galaxie 500 - Position: Lower
  • 1972-1976 Ford Gran Torino - Position: Lower
  • 1979-1979 Ford F-100 - Position: Lower
  • 1970-1976 Mercury Montego - Position: Lower
  • 1969-1974 Ford Ranch Wagon - Position: Lower
  • 1969-1974 Ford Country Sedan - Position: Lower
  • 1973-1979 Ford F-350 - Position: Lower
  • 1975-1976 Ford Elite - Position: Lower
  • 1970-1971 Mercury Cougar - Position: Lower
  • 1975-1979 Ford F-150 - Position: Lower
  • 1969-1978 Ford LTD - Position: Lower
  • 1983-1987 Ford F-350 - Position: Lower
  • 1970-1976 Ford Torino - Position: Lower
  • 1969-1978 Mercury Marquis - Position: Lower
  • 1969-1972 Ford Custom - Position: Lower
  • 1975-1978 Mercury Grand Marquis - Position: Lower
  • 1970-1971 Mercury Cyclone - Position: Lower
  • 1968-1978 Lincoln Continental - Position: Lower
  • 1973-1974 Ford F-100 - Position: Lower

Product type:
Aftermarket
Features and Benefits:
Stealth Intake Manifold 429, 460 V8 (Cobra Jet and Super Cobra Jet heads)This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appear
Features and Benefits:
High Rise/Dual Plane Design
Features and Benefits:
Height Front 5.25 in.; Rear 6.75 in.
Features and Benefits:
Port Size 2.49 in. Height x 2.20 in. Width
Features and Benefits:
Idle-6800 RPM Power Band
Features and Benefits:
Square Carburetor Mounting Flange
Brand Description:
Stealth™ Intake Manifold
Product Description:
Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; w/Cobra Jet/Super Cobra Jet Heads; Square Carb. Mounting Flange; No EGR Provisions; Satin Finish;
Engine Make/Size:
Ford Big Block V8
Finish:
Satin
WARNING CA Proposition 65:
No
Usage:
Street/Strip
Position:
Lower
Construction:
Cast
Cylinder Head Type:
Standard
Emission:
Without EGR
Front Height:
5.250 in.
Fuel System Type:
Carb
Manifold Type:
High Rise
Number of Carbs:
One
Rear Height:
6.750 in.
RPM Range:
Idle-6800
Short Description:
Intake Manifold
Hazardous Material:
No
Minimum Order Quantity:
1
Life Cycle Status:
Available to Order
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Weight - Each (Gross Pounds):
22.1650
Item Level GTIN:
00032474802101
Height - Each (Inch):
7.5500
Quantity Per Application:
1
Length - Each (Inch):
24.0000
Width - Each (Inch):
13.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top