×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Weiand 8123WND | Lower Engine Intake Manifold
click to zoom in

Weiand 8123WND | Lower Engine Intake Manifold

(No reviews yet) Write a Review
$346.95
Part Number
WEI8123WND
UPC:
90127661697
Condition:
New
5 customers are viewing this product

video gallery

Description

Most of the intakes on the market were developed 20+ years ago when typical engines were 396-427 cubic inches. Not so anymore. With the popularity of larger engines, stroker combinations and more efficient cylinder head and cam designs came the need for intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, the Street Warrior intake rises to the challenge and delivers the performance to conquer the competition! Want maximum horsepower and torque from today's engines? Choose Street Warrior!

BRAND: Weiand

FEATURES:

  • Holley Performance Emission Code 3: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles: 1965 and older U.S. manufactured California Certified vehicles/1967 and older U.S. manufactured Federally Certified vehicles/1967 and older Foreign manufactured vehicle. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle
  • Most of the intakes on the market were d
  • Optimized Design For Todays Higher Output Big Block Engines
  • Oval Port Dimensions 1.775 in. High x 1.600 in. Wide
  • Runner Geometry Optimized Uses Computational Fluid Dynamics Softw
  • Street Warrior™ Intake Manifold; Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last];
  • Low Rise Dual Plane Design Delivers Friendly Power
  • Street Warrior™ Intake Manifold
  • Idle-5500 RPM Power Band
  • Low Rise Design Delivers Torque Across The Usable RPM Range
  • Univ. Dual Pattern Carb Flange Accepts Spread/Square Bore Carbs
  • Height Front 4.25 in.; Rear 5.42 in.
  • Permanent Mold 319 Alum. Construction Is Precision CNC Machined

SPECIFICS:

BarrelFour
ConstructionCast
Cylinder Head TypeOval Port- Standard
EmissionN/A
Engine Make/SizeChevy Big Block V8
FinishSatin
Fuel System TypeCarb
Manifold TypeLow Rise
Number of CarbsOne
PositionLower
RPM RangeIdle-5500
UsageStreet/Strip
WARNING CA Proposition 65No

DOWNLOADS:

APPLICATIONS:

  • 1963-1963 Chevrolet Impala - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1972-1972 Chevrolet Townsman - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1973-1975 Chevrolet Malibu - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1972-1972 Chevrolet Bel Air - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last] Legal Only For Off-Highway Use Or Racing
  • 1970-1972 Chevrolet Kingswood - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1963-1963 Chevrolet Bel Air - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1973-1975 Chevrolet Laguna - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1966-1974 Chevrolet Corvette - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1968-1968 Chevrolet Chevy II - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1966-1967 Chevrolet Malibu - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1970-1970 Chevrolet Townsman - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1972-1972 Chevrolet Brookwood - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1966-1976 Chevrolet Caprice - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1969-1970 Chevrolet Nova - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1965-1972 Chevrolet Biscayne - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1965-1973 Chevrolet Chevelle - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1967-1972 Chevrolet Camaro - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1963-1963 Chevrolet Biscayne - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1965-1975 Chevrolet Bel Air - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1965-1976 Chevrolet Impala - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]
  • 1970-1975 Chevrolet Monte Carlo - Position: Lower
    • Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last]

Attributes
Product type:
Aftermarket
Features and Benefits:
Most of the intakes on the market were developed 20+ years ago when typical engines were 396-427 cubic inches. Not so anymore. With the popularity of larger engines, stroker combinations and more efficient cylinder head and cam designs came the nee
Features and Benefits:
Optimized Design For Todays Higher Output Big Block Engines
Features and Benefits:
Low Rise Dual Plane Design Delivers Friendly Power
Features and Benefits:
Low Rise Design Delivers Torque Across The Usable RPM Range
Features and Benefits:
Permanent Mold 319 Alum. Construction Is Precision CNC Machined
Features and Benefits:
Height Front 4.25 in.; Rear 5.42 in.
Features and Benefits:
Runner Geometry Optimized Uses Computational Fluid Dynamics Softw
Features and Benefits:
Univ. Dual Pattern Carb Flange Accepts Spread/Square Bore Carbs
Features and Benefits:
Idle-5500 RPM Power Band
Features and Benefits:
Oval Port Dimensions 1.775 in. High x 1.600 in. Wide
Brand Description:
Street Warrior™ Intake Manifold
Product Description:
Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise; w/Oval Port Heads; Square/Spread Bore; Satin Finish; [Available While Supplies Last];
Engine Make/Size:
Chevy Big Block V8
Finish:
Satin
WARNING CA Proposition 65:
No
Usage:
Street/Strip
Position:
Lower
Barrel:
Four
Construction:
Cast
Cylinder Head Type:
Oval Port- Standard
Emission:
N/A
Fuel System Type:
Carb
Manifold Type:
Low Rise
Number of Carbs:
One
RPM Range:
Idle-5500
Short Description:
Intake Manifold
Hazardous Material:
No
Minimum Order Quantity:
1
Life Cycle Status:
Available to Order
Weight - Each (Gross Pounds):
16.8500
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Height - Each (Inch):
7.1000
Item Level GTIN:
00090127661697
Length - Each (Inch):
25.1000
Quantity Per Application:
1
Width - Each (Inch):
12.2000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top